From: Peng Fan <peng.fan@xxxxxxx>
i.MX95 System Management Control Firmware(SCMI) manages the clock
function, it exposes PLL VCO which could support up to 5GHz rate that
exceeds UINT32_MAX. So add assigned-clock-rates-u64 support
to set rate that exceeds UINT32_MAX.
Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
drivers/clk/clk-conf.c | 42 +++++++++++++++++++++++++++++++++++++-----
1 file changed, 37 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/clk-conf.c b/drivers/clk/clk-conf.c
index 058420562020..51f994366d73 100644
--- a/drivers/clk/clk-conf.c
+++ b/drivers/clk/clk-conf.c
@@ -81,11 +81,44 @@ static int __set_clk_parents(struct device_node *node, bool clk_supplier)
static int __set_clk_rates(struct device_node *node, bool clk_supplier)
{
struct of_phandle_args clkspec;
- int rc, index = 0;
+ int rc, count, count_64, index;
struct clk *clk;
- u32 rate;
+ u64 *rates_64 __free(kfree) = NULL;
+ u32 *rates __free(kfree) = NULL;
+
+ count = of_property_count_u32_elems(node, "assigned-clock-rates");
+ count_64 = of_property_count_u64_elems(node, "assigned-clock-rates-u64");
+ if (count_64 > 0) {
+ count = count_64;
+ rates_64 = kcalloc(count, sizeof(*rates_64), GFP_KERNEL);
+ if (!rates_64)
+ return -ENOMEM;
+
+ rc = of_property_read_u64_array(node,
+ "assigned-clock-rates-u64",
+ rates_64, count);
+ } else if (count > 0) {
+ rates = kcalloc(count, sizeof(*rates), GFP_KERNEL);
+ if (!rates)
+ return -ENOMEM;
+
+ rc = of_property_read_u32_array(node, "assigned-clock-rates",
+ rates, count);
+ } else {
+ return 0;
+ }
+
+ if (rc)
+ return rc;
+
+ for (index = 0; index < count; index++) {
+ unsigned long rate;
+
+ if (rates_64)
+ rate = rates_64[index];
+ else
+ rate = rates[index];
- of_property_for_each_u32(node, "assigned-clock-rates", rate) {
if (rate) {
rc = of_parse_phandle_with_args(node, "assigned-clocks",
"#clock-cells", index, &clkspec);
@@ -112,12 +145,11 @@ static int __set_clk_rates(struct device_node *node, bool clk_supplier)
rc = clk_set_rate(clk, rate);
if (rc < 0)
- pr_err("clk: couldn't set %s clk rate to %u (%d), current rate: %lu\n",
+ pr_err("clk: couldn't set %s clk rate to %lu (%d), current rate: %lu\n",
__clk_get_name(clk), rate, rc,
clk_get_rate(clk));
clk_put(clk);
}
- index++;
}
return 0;
}
--
2.37.1
