> Subject: [PATCH 07/14] arm64: dts: freescale: imx93-tqma9352-
> mba93xxla: add irq for temp sensor
>
> From: Markus Niebel <Markus.Niebel@xxxxxxxxxxxxxxx>
>
> This adds muxing and configuration of the irq output of the temp
> sensor on TQMa93xx that is connected to a GPIO line on MBa93xxLA
>
> While at it, add comment for RTC_EVENT for pcf85063 since the IRQ
> line of both devices on SoM are routed to CPU GPIO on MBa93xxLA.
>
> Signed-off-by: Markus Niebel <Markus.Niebel@xxxxxxxxxxxxxxx>
> Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
> ---
> .../boot/dts/freescale/imx93-tqma9352-mba93xxla.dts | 10
> +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-
> mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-
> mba93xxla.dts
> index c663b6585c3a..3038c94a1184 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
> +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
> @@ -452,13 +452,21 @@ &lpuart8 {
> };
>
> &pcf85063 {
> - /* RTC_EVENT# is connected on MBa93xxLA */
> + /* RTC_EVENT# from SoM is connected on mainboard */
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_pcf85063>;
> interrupt-parent = <&gpio1>;
> interrupts = <14 IRQ_TYPE_EDGE_FALLING>; };
>
> +&se97_som {
> + /* TEMP_EVENT# from SoM is connected on mainboard */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_temp_sensor_som>;
pinctrl_temp_sensor_som node node added?
Regards,
Peng.
