From: Markus Niebel <Markus.Niebel@xxxxxxxxxxxxxxx>
This adds muxing and configuration of the irq output of the temp
sensor on TQMa93xx that is connected to a GPIO line on MBa93xxLA
While at it, add comment for RTC_EVENT for pcf85063 since the IRQ line
of both devices on SoM are routed to CPU GPIO on MBa93xxLA.
Signed-off-by: Markus Niebel <Markus.Niebel@xxxxxxxxxxxxxxx>
Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
---
.../boot/dts/freescale/imx93-tqma9352-mba93xxla.dts | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
index c663b6585c3a..3038c94a1184 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -452,13 +452,21 @@ &lpuart8 {
};
&pcf85063 {
- /* RTC_EVENT# is connected on MBa93xxLA */
+ /* RTC_EVENT# from SoM is connected on mainboard */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcf85063>;
interrupt-parent = <&gpio1>;
interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
};
+&se97_som {
+ /* TEMP_EVENT# from SoM is connected on mainboard */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_temp_sensor_som>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
&tpm5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpm5>;
--
2.34.1
