Add documentation for the AD7625/AD7626/AD7960/AD7961 ADCs. Signed-off-by: Trevor Gamblin <tgamblin@xxxxxxxxxxxx> --- Documentation/iio/ad7625.rst | 91 ++++++++++++++++++++++++++++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 92 insertions(+) diff --git a/Documentation/iio/ad7625.rst b/Documentation/iio/ad7625.rst new file mode 100644 index 000000000000..61761e3b75c3 --- /dev/null +++ b/Documentation/iio/ad7625.rst @@ -0,0 +1,91 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +==================== +AD7625 driver +==================== + +ADC driver for Analog Devices Inc. AD7625, AD7626, AD7960, and AD7961 +devices. The module name is ``ad7625``. + +Supported devices +================= + +The following chips are supported by this driver: + +* `AD7625 <https://www.analog.com/AD7625>`_ +* `AD7626 <https://www.analog.com/AD7626>`_ +* `AD7960 <https://www.analog.com/AD7960>`_ +* `AD7961 <https://www.analog.com/AD7961>`_ + +The driver requires use of the Pulsar LVDS HDL project: + +* `Pulsar LVDS HDL <http://analogdevicesinc.github.io/hdl/projects/pulsar_lvds/index.html>`_ + +To trigger conversions and enable subsequent data transfer, the devices +require coupled PWM signals with a phase offset. + +Supported features +================== + +Conversion control modes +------------------------ + +The driver currently supports one of two possible LVDS conversion control methods. + +Echoed-Clock interface mode +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. code-block:: + + +----------------+ + +xxxxxxxxxxxxxxxxxxxxxxxxxx| CNV | + X | | + v | HOST | + +----------------------------+ | | + | CNV+/CNV- DCO+/DCO- |xxxxxxx>| CLK_IN | + | | | | + | | | | + | AD7625 D+/D- |xxxxxxx>| DATA_IN | + | | | | + | | | | + | CLK+/CLK- |<xxxxxxx| CLK & CLK_GATE | + +----------------------------+ | | + +----------------+ + +Reference voltage +----------------- + +Three possible reference voltage sources are supported: + +- Internal reference (only available on AD7625 and AD7626) +- External reference and internal buffer +- External reference + +The source is determined by the device tree. If ``ref-supply`` is present, then +the external reference is used. If ``refin-supply`` is present, then the internal +buffer is used. If neither is present, then the internal reference is used. + +Unimplemented features +---------------------- + +- Self-clocked mode + + +Device attributes +================= + +The AD762x is a fully-differential ADC and has the following attributes: + ++---------------------------------------+--------------------------------------------------------------+ +| Attribute | Description | ++=======================================+==============================================================+ +| ``scale`` | Scale factor to convert raw value from buffered reads to mV. | ++---------------------------------------+--------------------------------------------------------------+ + + +Device buffers +============== + +This driver supports IIO triggered buffers. + +See :doc:`iio_devbuf` for more information. diff --git a/MAINTAINERS b/MAINTAINERS index a90972e1c5c5..97c9b03e1cf0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1268,6 +1268,7 @@ S: Supported W: https://ez.analog.com/linux-software-drivers W: http://analogdevicesinc.github.io/hdl/projects/pulsar_lvds/index.html F: Documentation/devicetree/bindings/iio/adc/adi,ad7625.yaml +F: Documentation/iio/ad7625.rst F: drivers/iio/adc/ad7625.c ANALOG DEVICES INC AD7768-1 DRIVER -- 2.39.2
