* Arnd Bergmann <arnd@xxxxxxxx> [150310 07:11]:
> On Tuesday 10 March 2015 13:00:19 Eliad Peller wrote:
> > On Tue, Mar 10, 2015 at 12:49 AM, Tony Lindgren <tony@xxxxxxxxxxx> wrote:
> > > * Eliad Peller <eliad@xxxxxxxxxx> [150309 14:03]:
> > >> On Mon, Mar 9, 2015 at 9:50 PM, Arnd Bergmann <arnd@xxxxxxxx> wrote:
> > >> > On Monday 09 March 2015 17:36:42 Eliad Peller wrote:
> > >> >> --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
> > >> >> +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
> > >> >> @@ -64,4 +64,13 @@
> > >> >> vmmc-supply = <&lbep5clwmc_wlen>;
> > >> >> bus-width = <4>;
> > >> >> non-removable;
> > >> >> +
> > >> >> + #address-cells = <1>;
> > >> >> + #size-cells = <0>;
> > >> >> + wlcore: wlcore@2 {
> > >> >> + compatible = "ti,wl1835";
> > >> >> + reg = <2>;
> > >> >> + interrupt-parent = <&gpio5>;
> > >> >> + interrupts = <8 IRQ_TYPE_NONE>;
> > >> >> + };
> > >> >>
> > >> >
> > >> > Why IRQ_TYPE_NONE?
> > >> >
> > >> i simply mirrored the current board file (which only sets the irq number).
> > >>
> > >> > I was expecting you to remove all calls to legacy_init_wl12xx from this file,
> > >> > including the ones for wl12xx aside from the wl18xx ones you removed, but
> > >> > if that's enough to clean out the platform_data handling from the wlcore
> > >> > driver, it's good enough as a start.
> > >> not sure i'm following - can you elaborate?
> > >>
> > >> i'll summarize the way i see it. please correct me if i'm wrong.
> > >>
> > >> both wl18xx and wl12xx use the platform data to get the irq number.
> > >> wl12xx (only) also needs some additional clock definitions to be
> > >> passed. there's currently some issue with specifying some the of clock
> > >> sources, so i preferred starting only with (the simpler) wl18xx
> > >> bindings.
> > >>
> > >> for platforms with wl18xx, we can remove the pdata-quirk, as all the
> > >> data (i.e. irq) can be passed by the new DT bindings.
> > >> however, for platforms with wl12xx, we still need to pass the clock
> > >> definitions (along with the irq), so we have to keep
> > >> legacy_init_wl12xx for the time being (and that's also why we have to
> > >> currently keep the platform_data handling in the wlcore driver)
> > >>
> > >> do you have something else in mind?
> > >
> > > I think what Arnd is saying is we've now removed all the wl12xx using
> > > legacy platforms, so all of them can boot with just data from dts.
>
> Right, that was my idea.
>
> > I don't think that's the case (unless i'm missing something).
> > e.g. there's still pdata-quirk for "compulab,omap3-sbc-t3730" which
> > initializes wl12xx device.
>
> This one is just like the igep0030, as Tony was saying: the board
> boots from device tree already, so now that we have a binding for
> it, we can remove the wl12xx_set_platform_data() for it.
>
> Unfortunately, there is still one machine that uses a board file
> in combination with this wl12xx: da850-evm calls
> wl12xx_set_platform_data() from a legacy board file without DT.
>
> We have DT support for this file as well, but if I remember correctly,
> it is somewhat incomplete and we don't want to remove the file
> yet. Adding Sekhar and Kevin to Cc here for confirmation.
Oops I forgot about the omap3-sbc-t3730, so yes we have to keep the
platform data a little bit longer. But nothing stopping us moving
all the other ones to use a proper device tree based configuration.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
