The aim of this serie is to add scaling support to STM32 DFSDM peripheral in the analog context. The DFSDM currently operates as a consumer of IIO channels provided by a generic SD modulator. As previously discussed in RFC [1], this topology is not suitable for implementing scaling. This series brings the integration of the DFSDM driver with the new IIO backend framework [2], enabling the DFSDM IIO device to offer scaling feature based on reference voltage data obtained from the IIO SD modulator backend. This generic SD modulator backend takes the place of the former SD modulator, used with legacy implementation. The DFSDM driver has been updated to adopt the generic ADC channel binding [3]. The reasons for this include: - Reducing the use of proprietary properties - Simplifying the coexistence of legacy and new backend bindings - Prepare the support of the MDF peripheral on STM32MP25 SoC Backward compatibility is maintained through legacy support. This series extends the backend framework with the following APIs: - iio_backend_read_raw: This API is intented to retrieve channel attributes from the backend. It is based on IIO framework read_raw API. - iio_backend_read_scale / iio_backend_read_offset Dedicated APIs to read scale and offset channel values. - iio_backend_disable / iio_backend_enable: backend enable/disable to be used for PM management - devm_iio_backend_fwnode_get Intended for parsing DT subnodes to allow generic channel binding support, as generic channel DT nodes are not populated as devices. [1]: https://lore.kernel.org/lkml/20200204101008.11411-1-olivier.moysan@xxxxxx/ [2]: https://lore.kernel.org/all/20240206-iio-backend-v9-0-df66d159c000@xxxxxxxxxx/ [3]: devicetree/bindings/iio/adc/adc.yaml Changes in v2: - Update enable/disable backend API - Rename devm_iio_backend_subnode_get(), as devm_iio_backend_fwnode_get() - Update iio_backend_read_raw() prototype to fully match IIO framework read_raw callback prototype. - Change st,adc-channel-type property name and type in DFSDM binding - Remove sd-backend and rename ads1201 compatibles in SD binding Changes in v3: - Add iio_backend_read_scale and iio_backend_read_offset - Remove sd-backend compatible. Adapt existing sd modulator driver and binding to support backend topology. - Misc corrections in DFSDM binding & minor changes in DFSDM driver Changes in v4: - Remove allOf and rework examples in SD modulator binding - Wrap lines to 80 characters in IIO code Changes in v5: - Move iio_backend_read_scale and iio_backend_read_offset to inline and update prototype - Fix channel number & remove legacy binding example in DFSDM binding - Rearrange DFSDM patches to fix build issue in serie - Split SD modulator binding patch. Move reference voltage change in a separate patch Changes in v6: - Minor cleanup in DFSDM binding - Fix vref-supply dependency condition in SD modulator binding Olivier Moysan (9): iio: add read scale and offset services to iio backend framework iio: add enable and disable services to iio backend framework iio: add child nodes support in iio backend framework dt-bindings: iio: dfsdm: move to backend framework dt-bindings: iio: add backend support to sd modulator dt-bindings: iio: add vref support to sd modulator iio: adc: stm32-dfsdm: adopt generic channels bindings iio: add iio backend support to sd modulator iio: adc: stm32-dfsdm: add scaling support to dfsdm .../iio/adc/sigma-delta-modulator.yaml | 25 +- .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 122 +++++++- drivers/iio/adc/Kconfig | 2 + drivers/iio/adc/sd_adc_modulator.c | 92 +++++- drivers/iio/adc/stm32-dfsdm-adc.c | 293 +++++++++++++++--- drivers/iio/industrialio-backend.c | 101 +++++- include/linux/iio/backend.h | 29 +- 7 files changed, 592 insertions(+), 72 deletions(-) base-commit: bf829a98bc4bb9076a2fd70f4a69ea7e281863fa -- 2.25.1
