As most other board Miix uses board-id = 0xff, so define calibration
variant to distinguish it from other devices with the same chip_id.
qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40010002
Cc: Kalle Valo <kvalo@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
index fad5f390171a..901f6ac0084d 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
@@ -99,3 +99,7 @@ i2c5_hid_active: i2c5-hid-active-state {
drive-strength = <2>;
};
};
+
+&wifi {
+ qcom,ath10k-calibration-variant = "Lenovo_Miix630";
+};
--
2.39.2
