On 22/07/2024 11:41, ysionneau@xxxxxxxxxxxxx wrote: > From: Yann Sionneau <ysionneau@xxxxxxxxxxxxx> > > Add binding for Kalray Coolidge SoC cluster power controller. > > Signed-off-by: Yann Sionneau <ysionneau@xxxxxxxxxxxxx> > --- > > Notes: > > V2 -> V3: New patch > --- > .../soc/kvx/kalray,coolidge-pwr-ctrl.yaml | 37 +++++++++++++++++++ > 1 file changed, 37 insertions(+) > create mode 100644 Documentation/devicetree/bindings/soc/kvx/kalray,coolidge-pwr-ctrl.yaml > > diff --git a/Documentation/devicetree/bindings/soc/kvx/kalray,coolidge-pwr-ctrl.yaml b/Documentation/devicetree/bindings/soc/kvx/kalray,coolidge-pwr-ctrl.yaml > new file mode 100644 > index 0000000000000..e0363a080ac11 > --- /dev/null > +++ b/Documentation/devicetree/bindings/soc/kvx/kalray,coolidge-pwr-ctrl.yaml > @@ -0,0 +1,37 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/kalray/kalray,coolidge-pwr-ctrl.yaml# It does not look like you tested the bindings, at least after quick look. Please run `make dt_binding_check` (see Documentation/devicetree/bindings/writing-schema.rst for instructions). Maybe you need to update your dtschema and yamllint. Best regards, Krzysztof
