From: Pieter Van Trappen <pieter.van.trappen@xxxxxxx> Correct KSZ9477 WoL function description, found when evaluating it for usage at KSZ8795 family of switches. Signed-off-by: Pieter Van Trappen <pieter.van.trappen@xxxxxxx> --- drivers/net/dsa/microchip/ksz9477.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index 425e20daf1e9..1344b60ee2c3 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -95,9 +95,9 @@ static int ksz9477_handle_wake_reason(struct ksz_device *dev, int port) * @port: The port number. * @wol: Pointer to ethtool Wake-on-LAN settings structure. * - * This function checks the PME Pin Control Register to see if PME Pin Output - * Enable is set, indicating PME is enabled. If enabled, it sets the supported - * and active WoL flags. + * This function checks the PME 'wakeup-source' property from the + * device tree. If enabled, it sets the supported and active WoL + * flags. */ void ksz9477_get_wol(struct ksz_device *dev, int port, struct ethtool_wolinfo *wol) @@ -135,7 +135,7 @@ void ksz9477_get_wol(struct ksz_device *dev, int port, * * This function configures Wake-on-LAN (WoL) settings for a specified port. * It validates the provided WoL options, checks if PME is enabled via the - * switch's PME Pin Control Register, clears any previous wake reasons, + * switch's device tree property, clears any previous wake reasons, * and sets the Magic Packet flag in the port's PME control register if * specified. * -- 2.43.0
