From: Pieter Van Trappen <pieter.van.trappen@xxxxxxx>
Add microchip,pme-active-high property to set the PME (Power
Management Event) pin polarity for Wake on Lan interrupts.
Note that the polarity is active-low by default.
Signed-off-by: Pieter Van Trappen <pieter.van.trappen@xxxxxxx>
---
Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
index 52acc15ebcbf..c589ebc2c7be 100644
--- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -51,6 +51,11 @@ properties:
Set if the output SYNCLKO clock should be disabled. Do not mix with
microchip,synclko-125.
+ microchip,pme-active-high:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Indicates if the PME pin polarity is active-high.
+
microchip,io-drive-strength-microamp:
description:
IO Pad Drive Strength
--
2.43.0
