[PATCH v3 0/2] Add Add elan-ekth6a12nay on the basis of elan-ekth6915

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Elan-ekth6a12nay requires reset to pull down time greater than 10ms,
so the configuration post_power_delay_ms is 10, and the chipset
initial time is required to be greater than 300ms, so the 
post_gpio_reset_on_delay_ms is set to 300.

The Elan-ekth6a12nay touch screen chip same as Elan-eKTH6915 controller
has a reset gpio. The difference is that they have different
post_power_delay_ms.

Changes between V3 and V2:
- PATCH 1/2: Respin the series on top of v6.10.
- PATCH 2/2: No changes.
- Link to v1: https://lore.kernel.org/all/20240715073159.25064-1-lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/

Changes between V2 and V1:
- PATCH 1/2: Respin the series on top of v6.10.
- PATCH 2/2: No changes.
- Link to v1: https://lore.kernel.org/all/20240704085555.11204-1-lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/

Zhaoxiong Lv (2):
  dt-bindings: HID: i2c-hid: elan: Introduce Elan ekth6a12nay
  HID: i2c-hid: elan: Add elan-ekth6a12nay timing

 .../devicetree/bindings/input/elan,ekth6915.yaml          | 1 +
 drivers/hid/i2c-hid/i2c-hid-of-elan.c                     | 8 ++++++++
 2 files changed, 9 insertions(+)

-- 
2.17.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux