On 15.07.2024 13:47, Varshini.Rajendran@xxxxxxxxxxxxx wrote:
> Hi Claudiu,
>
> On 14/07/24 7:14 pm, claudiu beznea wrote:
>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>
>> Hi, Varshini,
>>
>> On 03.07.2024 13:29, Varshini Rajendran wrote:
>>> Add device tree file for SAM9X7 SoC family.
>>>
>>> Co-developed-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
>>> Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
>>> Signed-off-by: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
>>> ---
>>> Changed in v5:
>>> - Sorted node properties according dts coding style.
>>> - Removed space before pwn status.
>>> - Fixed DT schema warnings related to usart.
>>> - Aligned <> braces.
>>> - Changed spaces to tabs.
>>> - Changed node names to generic names.
>>> - Corrected the typo in gpbr compatible.
>>> ---
>>> arch/arm/boot/dts/microchip/sam9x7.dtsi | 1226 +++++++++++++++++++++++
>>> 1 file changed, 1226 insertions(+)
>>> create mode 100644 arch/arm/boot/dts/microchip/sam9x7.dtsi
>>>
>>> diff --git a/arch/arm/boot/dts/microchip/sam9x7.dtsi b/arch/arm/boot/dts/microchip/sam9x7.dtsi
>>> new file mode 100644
>>> index 000000000000..0e3fb94f40b6
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/microchip/sam9x7.dtsi
>>> @@ -0,0 +1,1226 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>> +/*
>>> + * sam9x7.dtsi - Device Tree Include file for Microchip SAM9X7 SoC family
>>> + *
>>> + * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
>>> + *
>>> + * Author: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
>>> + */
>>> +
>>> +#include <dt-bindings/clock/at91.h>
>>> +#include <dt-bindings/dma/at91.h>
>>> +#include <dt-bindings/gpio/gpio.h>
>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>> +#include <dt-bindings/mfd/at91-usart.h>
>>> +#include <dt-bindings/mfd/atmel-flexcom.h>
>>> +#include <dt-bindings/pinctrl/at91.h>
>>> +
>>> +/ {
>>> + model = "Microchip SAM9X7 SoC";
>>> + compatible = "microchip,sam9x7";
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + interrupt-parent = <&aic>;
>>> +
>>> + aliases {
>>> + serial0 = &dbgu;
>>> + gpio0 = &pioA;
>>> + gpio1 = &pioB;
>>> + gpio2 = &pioC;
>>> + gpio3 = &pioD;
>>> + };
>>> +
>>> + cpus {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + cpu@0 {
>>> + compatible = "arm,arm926ej-s";
>>> + reg = <0>;
>>> + device_type = "cpu";
>>> + };
>>> + };
>>> +
>>> + clocks {
>>> + slow_xtal: clock-slowxtal {
>>> + compatible = "fixed-clock";
>>> + #clock-cells = <0>;
>>> + };
>>> +
>>> + main_xtal: clock-mainxtal {
>>> + compatible = "fixed-clock";
>>> + #clock-cells = <0>;
>>> + };
>>> + };
>>> +
>>> + sram: sram@300000 {
>>> + compatible = "mmio-sram";
>>> + reg = <0x300000 0x10000>;
>>> + ranges = <0 0x300000 0x10000>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + };
>>> +
>>> + ahb {
>>> + compatible = "simple-bus";
>>> + ranges;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> +
>>> + sdmmc0: mmc@80000000 {
>>> + compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci";
>>> + reg = <0x80000000 0x300>;
>>> + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
>>> + clock-names = "hclock", "multclk";
>>> + assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
>>> + assigned-clock-rates = <100000000>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + sdmmc1: mmc@90000000 {
>>> + compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci";
>>> + reg = <0x90000000 0x300>;
>>> + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
>>> + clock-names = "hclock", "multclk";
>>> + assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
>>> + assigned-clock-rates = <100000000>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + apb {
>>> + compatible = "simple-bus";
>>> + ranges;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> +
>>> + flx4: flexcom@f0000000 {
>>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>>> + reg = <0xf0000000 0x200>;
>>> + ranges = <0x0 0xf0000000 0x800>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
>>> + status = "disabled";
>>> +
>>> + uart4: serial@200 {
>>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>>> + reg = <0x200 0x200>;
>>> + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
>>> + clock-names = "usart";
>>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> According to dts coding style that vendor specific properties goes at the
>> end. I'll adjust it when applying, no need to resend for this. Valid for
>> all the uart flexcom nodes.
> Thanks Claudiu.
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(8))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(9))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,use-dma-rx;
>>> + atmel,use-dma-tx;
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + spi4: spi@400 {
>>> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
>>> + reg = <0x400 0x200>;
>>> + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
>>> + clock-names = "spi_clk";
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(8))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(9))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + i2c4: i2c@600 {
>>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>>> + reg = <0x600 0x200>;
>>> + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(8))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(9))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + flx5: flexcom@f0004000 {
>>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>>> + reg = <0xf0004000 0x200>;
>>> + ranges = <0x0 0xf0004000 0x800>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
>>> + status = "disabled";
>>> +
>>> + uart5: serial@200 {
>>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>>> + reg = <0x200 0x200>;
>>> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
>>> + clock-names = "usart";
>>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(10))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(11))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,use-dma-rx;
>>> + atmel,use-dma-tx;
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + spi5: spi@400 {
>>> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
>>> + reg = <0x400 0x200>;
>>> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
>>> + clock-names = "spi_clk";
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(10))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(11))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + i2c5: i2c@600 {
>>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>>> + reg = <0x600 0x200>;
>>> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(10))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(11))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + dma0: dma-controller@f0008000 {
>>> + compatible = "microchip,sam9x7-dma", "atmel,sama5d4-dma";
>>> + reg = <0xf0008000 0x1000>;
>>> + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
>>> + #dma-cells = <1>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
>>> + clock-names = "dma_clk";
>>> + status = "disabled";
>>> + };
>>> +
>>> + ssc: ssc@f0010000 {
>>> + compatible = "microchip,sam9x7-ssc", "atmel,at91sam9g45-ssc";
>>> + reg = <0xf0010000 0x4000>;
>>> + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
>>> + clock-names = "pclk";
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(38))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(39))>;
>>> + dma-names = "tx", "rx";
>>> + status = "disabled";
>>> + };
>>> +
>>> + i2s: i2s@f001c000 {
>>> + compatible = "microchip,sam9x7-i2smcc", "microchip,sam9x60-i2smcc";
>>> + reg = <0xf001c000 0x100>;
>>> + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
>>> + clock-names = "pclk", "gclk";
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(36))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(37))>;
>>> + dma-names = "tx", "rx";
>>> + status = "disabled";
>>> + };
>>> +
>>> + flx11: flexcom@f0020000 {
>>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>>> + reg = <0xf0020000 0x200>;
>>> + ranges = <0x0 0xf0020000 0x800>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
>>> + status = "disabled";
>>> +
>>> + uart11: serial@200 {
>>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>>> + reg = <0x200 0x200>;
>>> + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
>>> + clock-names = "usart";
>>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(22))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(23))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,use-dma-rx;
>>> + atmel,use-dma-tx;
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + i2c11: i2c@600 {
>>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>>> + reg = <0x600 0x200>;
>>> + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(22))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(23))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + flx12: flexcom@f0024000 {
>>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>>> + reg = <0xf0024000 0x200>;
>>> + ranges = <0x0 0xf0024000 0x800>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
>>> + status = "disabled";
>>> +
>>> + uart12: serial@200 {
>>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>>> + reg = <0x200 0x200>;
>>> + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
>>> + clock-names = "usart";
>>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(24))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(25))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,use-dma-rx;
>>> + atmel,use-dma-tx;
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + i2c12: i2c@600 {
>>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>>> + reg = <0x600 0x200>;
>>> + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(24))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(25))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + pit64b0: timer@f0028000 {
>>> + compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b";
>>> + reg = <0xf0028000 0x100>;
>>> + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
>>> + clock-names = "pclk", "gclk";
>>> + };
>>> +
>>> + sha: crypto@f002c000 {
>>> + compatible = "microchip,sam9x7-sha", "atmel,at91sam9g46-sha";
>>> + reg = <0xf002c000 0x100>;
>>> + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
>>> + clock-names = "sha_clk";
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(34))>;
>>> + dma-names = "tx";
>>> + };
>>> +
>>> + trng: rng@f0030000 {
>>> + compatible = "microchip,sam9x7-trng", "microchip,sam9x60-trng";
>>> + reg = <0xf0030000 0x100>;
>>> + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + aes: crypto@f0034000 {
>>> + compatible = "microchip,sam9x7-aes", "atmel,at91sam9g46-aes";
>>> + reg = <0xf0034000 0x100>;
>>> + interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
>>> + clock-names = "aes_clk";
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(32))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(33))>;
>>> + dma-names = "tx", "rx";
>>> + };
>>> +
>>> + tdes: crypto@f0038000 {
>>> + compatible = "microchip,sam9x7-tdes", "atmel,at91sam9g46-tdes";
>>> + reg = <0xf0038000 0x100>;
>>> + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
>>> + clock-names = "tdes_clk";
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(31))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(30))>;
>>> + dma-names = "tx", "rx";
>>> + };
>>> +
>>> + classd: sound@f003c000 {
>>> + compatible = "microchip,sam9x7-classd", "atmel,sama5d2-classd";
>>> + reg = <0xf003c000 0x100>;
>>> + interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
>>> + clock-names = "pclk", "gclk";
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(35))>;
>>> + dma-names = "tx";
>>> + status = "disabled";
>>> + };
>>> +
>>> + pit64b1: timer@f0040000 {
>>> + compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b";
>>> + reg = <0xf0040000 0x100>;
>>> + interrupts = <58 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
>>> + clock-names = "pclk", "gclk";
>>> + };
>>> +
>>> + can0: can@f8000000 {
>>> + compatible = "bosch,m_can";
>>> + reg = <0xf8000000 0x100>, <0x300000 0x7800>;
>>> + reg-names = "m_can", "message_ram";
>>> + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>,
>>> + <68 IRQ_TYPE_LEVEL_HIGH 0>;
>>> + interrupt-names = "int0", "int1";
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_GCK 29>;
>>> + clock-names = "hclk", "cclk";
>>> + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 29>;
>>> + assigned-clock-rates = <480000000>, <40000000>;
>>> + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
>>> + bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + can1: can@f8004000 {
>>> + compatible = "bosch,m_can";
>>> + reg = <0xf8004000 0x100>, <0x300000 0xbc00>;
>>> + reg-names = "m_can", "message_ram";
>>> + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>,
>>> + <69 IRQ_TYPE_LEVEL_HIGH 0>;
>>> + interrupt-names = "int0", "int1";
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 30>, <&pmc PMC_TYPE_GCK 30>;
>>> + clock-names = "hclk", "cclk";
>>> + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 30>;
>>> + assigned-clock-rates = <480000000>, <40000000>;
>>> + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
>>> + bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + tcb: timer@f8008000 {
>>> + compatible = "microchip,sam9x7-tcb","atmel,sama5d2-tcb", "simple-mfd", "syscon";
>>> + reg = <0xf8008000 0x100>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_GCK 17>, <&clk32k 0>;
>>> + clock-names = "t0_clk", "gclk", "slow_clk";
>>> + status = "disabled";
>>> + };
>>> +
>>> + flx6: flexcom@f8010000 {
>>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>>> + reg = <0xf8010000 0x200>;
>>> + ranges = <0x0 0xf8010000 0x800>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
>>> + status = "disabled";
>>> +
>>> + uart6: serial@200 {
>>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>>> + reg = <0x200 0x200>;
>>> + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
>>> + clock-names = "usart";
>>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(12))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(13))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,use-dma-rx;
>>> + atmel,use-dma-tx;
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + i2c6: i2c@600 {
>>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>>> + reg = <0x600 0x200>;
>>> + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(12))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(13))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + flx7: flexcom@f8014000 {
>>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>>> + reg = <0xf8014000 0x200>;
>>> + ranges = <0x0 0xf8014000 0x800>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
>>> + status = "disabled";
>>> +
>>> + uart7: serial@200 {
>>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>>> + reg = <0x200 0x200>;
>>> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
>>> + clock-names = "usart";
>>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(14))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(15))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,use-dma-rx;
>>> + atmel,use-dma-tx;
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + i2c7: i2c@600 {
>>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>>> + reg = <0x600 0x200>;
>>> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(14))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(15))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + flx8: flexcom@f8018000 {
>>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>>> + reg = <0xf8018000 0x200>;
>>> + ranges = <0x0 0xf8018000 0x800>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
>>> + status = "disabled";
>>> +
>>> + uart8: serial@200 {
>>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>>> + reg = <0x200 0x200>;
>>> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
>>> + clock-names = "usart";
>>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(16))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(17))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,use-dma-rx;
>>> + atmel,use-dma-tx;
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + i2c8: i2c@600 {
>>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>>> + reg = <0x600 0x200>;
>>> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(16))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(17))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + flx0: flexcom@f801c000 {
>>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>>> + reg = <0xf801c000 0x200>;
>>> + ranges = <0x0 0xf801c000 0x800>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
>>> + status = "disabled";
>>> +
>>> + uart0: serial@200 {
>>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>>> + reg = <0x200 0x200>;
>>> + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
>>> + clock-names = "usart";
>>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(0))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(1))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,use-dma-rx;
>>> + atmel,use-dma-tx;
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + spi0: spi@400 {
>>> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
>>> + reg = <0x400 0x200>;
>>> + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
>>> + clock-names = "spi_clk";
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(0))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(1))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + i2c0: i2c@600 {
>>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>>> + reg = <0x600 0x200>;
>>> + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(0))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(1))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + flx1: flexcom@f8020000 {
>>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>>> + reg = <0xf8020000 0x200>;
>>> + ranges = <0x0 0xf8020000 0x800>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
>>> + status = "disabled";
>>> +
>>> + uart1: serial@200 {
>>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>>> + reg = <0x200 0x200>;
>>> + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
>>> + clock-names = "usart";
>>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(2))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(3))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,use-dma-rx;
>>> + atmel,use-dma-tx;
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + spi1: spi@400 {
>>> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
>>> + reg = <0x400 0x200>;
>>> + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
>>> + clock-names = "spi_clk";
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(2))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(3))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + i2c1: i2c@600 {
>>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>>> + reg = <0x600 0x200>;
>>> + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(2))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(3))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + flx2: flexcom@f8024000 {
>>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>>> + reg = <0xf8024000 0x200>;
>>> + ranges = <0x0 0xf8024000 0x800>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
>>> + status = "disabled";
>>> +
>>> + uart2: serial@200 {
>>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>>> + reg = <0x200 0x200>;
>>> + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
>>> + clock-names = "usart";
>>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(4))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(5))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,use-dma-rx;
>>> + atmel,use-dma-tx;
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + spi2: spi@400 {
>>> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
>>> + reg = <0x400 0x200>;
>>> + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
>>> + clock-names = "spi_clk";
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(4))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(5))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + i2c2: i2c@600 {
>>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>>> + reg = <0x600 0x200>;
>>> + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(4))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(5))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + flx3: flexcom@f8028000 {
>>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>>> + reg = <0xf8028000 0x200>;
>>> + ranges = <0x0 0xf8028000 0x800>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
>>> + status = "disabled";
>>> +
>>> + uart3: serial@200 {
>>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>>> + reg = <0x200 0x200>;
>>> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
>>> + clock-names = "usart";
>>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(6))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(7))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,use-dma-rx;
>>> + atmel,use-dma-tx;
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + spi3: spi@400 {
>>> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
>>> + reg = <0x400 0x200>;
>>> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
>>> + clock-names = "spi_clk";
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(6))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(7))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + i2c3: i2c@600 {
>>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>>> + reg = <0x600 0x200>;
>>> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(6))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(7))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + gmac: ethernet@f802c000 {
>>> + compatible = "microchip,sam9x7-gem", "microchip,sama7g5-gem";
>>> + reg = <0xf802c000 0x1000>;
>>> + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 0 */
>>> + <60 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 1 */
>>> + <61 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 2 */
>>> + <62 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 3 */
>>> + <63 IRQ_TYPE_LEVEL_HIGH 3>, /* Queue 4 */
>>> + <64 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 5 */
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_GCK 24>, <&pmc PMC_TYPE_GCK 67>;
>>> + clock-names = "hclk", "pclk", "tx_clk", "tsu_clk";
>>> + assigned-clocks = <&pmc PMC_TYPE_GCK 67>;
>> Is this needed?
> Sorry I missed to add this line under it. This is needed for the PTP
> functionality.
>
> assigned-clock-rates = <266666666>;
>
> I can send another version if you want me to.
>>> + status = "disabled";
>>> + };
>>> +
>>> + pwm0: pwm@f8034000 {
>>> + compatible = "microchip,sam9x7-pwm", "microchip,sam9x60-pwm";
>>> + reg = <0xf8034000 0x300>;
>>> + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
>>> + #pwm-cells = <3>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + flx9: flexcom@f8040000 {
>>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>>> + reg = <0xf8040000 0x200>;
>>> + ranges = <0x0 0xf8040000 0x800>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
>>> + status = "disabled";
>>> +
>>> + uart9: serial@200 {
>>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>>> + reg = <0x200 0x200>;
>>> + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
>>> + clock-names = "usart";
>>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(18))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(19))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,use-dma-rx;
>>> + atmel,use-dma-tx;
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + i2c9: i2c@600 {
>>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>>> + reg = <0x600 0x200>;
>>> + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(18))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(19))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + flx10: flexcom@f8044000 {
>>> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>>> + reg = <0xf8044000 0x200>;
>>> + ranges = <0x0 0xf8044000 0x800>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
>>> + status = "disabled";
>>> +
>>> + uart10: serial@200 {
>>> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>>> + reg = <0x200 0x200>;
>>> + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
>>> + clock-names = "usart";
>>> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(20))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(21))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,use-dma-rx;
>>> + atmel,use-dma-tx;
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + i2c10: i2c@600 {
>>> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>>> + reg = <0x600 0x200>;
>>> + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
>>> + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
>>> + dmas = <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(20))>,
>>> + <&dma0
>>> + (AT91_XDMAC_DT_MEM_IF(0) |
>>> + AT91_XDMAC_DT_PER_IF(1) |
>>> + AT91_XDMAC_DT_PERID(21))>;
>>> + dma-names = "tx", "rx";
>>> + atmel,fifo-size = <16>;
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + sfr: sfr@f8050000 {
>>> + compatible = "microchip,sam9x7-sfr", "microchip,sam9x60-sfr", "syscon";
>>> + reg = <0xf8050000 0x100>;
>>> + };
>>> +
>>> + matrix: matrix@ffffde00 {
>>> + compatible = "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon";
>>> + reg = <0xffffde00 0x200>;
>>> + };
>>> +
>>> + pmecc: ecc-engine@ffffe000 {
>>> + compatible = "microchip,sam9x7-pmecc", "atmel,at91sam9g45-pmecc";
>>> + reg = <0xffffe000 0x300>, <0xffffe600 0x100>;
>>> + };
>>> +
>>> + mpddrc: mpddrc@ffffe800 {
>>> + compatible = "microchip,sam9x7-ddramc", "atmel,sama5d3-ddramc";
>>> + reg = <0xffffe800 0x200>;
>>> + clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
>>> + clock-names = "ddrck", "mpddr";
>>> + };
>>> +
>>> + smc: smc@ffffea00 {
>>> + compatible = "microchip,sam9x7-smc", "atmel,at91sam9260-smc", "syscon";
>>> + reg = <0xffffea00 0x100>;
>>> + };
>>> +
>>> + aic: interrupt-controller@fffff100 {
>>> + compatible = "microchip,sam9x7-aic", "microchip,sam9x60-aic";
>>> + reg = <0xfffff100 0x100>;
>>> + #interrupt-cells = <3>;
>>> + interrupt-controller;
>>> + atmel,external-irqs = <31>;
>>> + microchip,nr-irqs = <70>;
>> Ah, this needs to be clarified before applying.
> Can you discard the property and apply the rest (if this version can be
> applied)?
I think it's not booting anyway w/o microchip,nr-irqs. Am I wrong?
> I can resolve the irq number related issue in a separate
> series. Maybe fix the compatibles if required.
I prefer to have the driver ready before applying dts.
Thank you,
Claudiu Beznea
