Re: [PATCH v5 25/27] ARM: dts: at91: sam9x7: add device tree for SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Claudiu,

On 14/07/24 7:14 pm, claudiu beznea wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Hi, Varshini,
> 
> On 03.07.2024 13:29, Varshini Rajendran wrote:
>> Add device tree file for SAM9X7 SoC family.
>>
>> Co-developed-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
>> Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
>> Signed-off-by: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
>> ---
>> Changed in v5:
>> - Sorted node properties according dts coding style.
>> - Removed space before pwn status.
>> - Fixed DT schema warnings related to usart.
>> - Aligned <> braces.
>> - Changed spaces to tabs.
>> - Changed node names to generic names.
>> - Corrected the typo in gpbr compatible.
>> ---
>>   arch/arm/boot/dts/microchip/sam9x7.dtsi | 1226 +++++++++++++++++++++++
>>   1 file changed, 1226 insertions(+)
>>   create mode 100644 arch/arm/boot/dts/microchip/sam9x7.dtsi
>>
>> diff --git a/arch/arm/boot/dts/microchip/sam9x7.dtsi b/arch/arm/boot/dts/microchip/sam9x7.dtsi
>> new file mode 100644
>> index 000000000000..0e3fb94f40b6
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/microchip/sam9x7.dtsi
>> @@ -0,0 +1,1226 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * sam9x7.dtsi - Device Tree Include file for Microchip SAM9X7 SoC family
>> + *
>> + * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
>> + *
>> + * Author: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
>> + */
>> +
>> +#include <dt-bindings/clock/at91.h>
>> +#include <dt-bindings/dma/at91.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/mfd/at91-usart.h>
>> +#include <dt-bindings/mfd/atmel-flexcom.h>
>> +#include <dt-bindings/pinctrl/at91.h>
>> +
>> +/ {
>> +     model = "Microchip SAM9X7 SoC";
>> +     compatible = "microchip,sam9x7";
>> +     #address-cells = <1>;
>> +     #size-cells = <1>;
>> +     interrupt-parent = <&aic>;
>> +
>> +     aliases {
>> +             serial0 = &dbgu;
>> +             gpio0 = &pioA;
>> +             gpio1 = &pioB;
>> +             gpio2 = &pioC;
>> +             gpio3 = &pioD;
>> +     };
>> +
>> +     cpus {
>> +             #address-cells = <1>;
>> +             #size-cells = <0>;
>> +
>> +             cpu@0 {
>> +                     compatible = "arm,arm926ej-s";
>> +                     reg = <0>;
>> +                     device_type = "cpu";
>> +             };
>> +     };
>> +
>> +     clocks {
>> +             slow_xtal: clock-slowxtal {
>> +                     compatible = "fixed-clock";
>> +                     #clock-cells = <0>;
>> +             };
>> +
>> +             main_xtal: clock-mainxtal {
>> +                     compatible = "fixed-clock";
>> +                     #clock-cells = <0>;
>> +             };
>> +     };
>> +
>> +     sram: sram@300000 {
>> +             compatible = "mmio-sram";
>> +             reg = <0x300000 0x10000>;
>> +             ranges = <0 0x300000 0x10000>;
>> +             #address-cells = <1>;
>> +             #size-cells = <1>;
>> +     };
>> +
>> +     ahb {
>> +             compatible = "simple-bus";
>> +             ranges;
>> +             #address-cells = <1>;
>> +             #size-cells = <1>;
>> +
>> +             sdmmc0: mmc@80000000 {
>> +                     compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci";
>> +                     reg = <0x80000000 0x300>;
>> +                     interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
>> +                     clock-names = "hclock", "multclk";
>> +                     assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
>> +                     assigned-clock-rates = <100000000>;
>> +                     status = "disabled";
>> +             };
>> +
>> +             sdmmc1: mmc@90000000 {
>> +                     compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci";
>> +                     reg = <0x90000000 0x300>;
>> +                     interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
>> +                     clock-names = "hclock", "multclk";
>> +                     assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
>> +                     assigned-clock-rates = <100000000>;
>> +                     status = "disabled";
>> +             };
>> +     };
>> +
>> +     apb {
>> +             compatible = "simple-bus";
>> +             ranges;
>> +             #address-cells = <1>;
>> +             #size-cells = <1>;
>> +
>> +             flx4: flexcom@f0000000 {
>> +                     compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> +                     reg = <0xf0000000 0x200>;
>> +                     ranges = <0x0 0xf0000000 0x800>;
>> +                     #address-cells = <1>;
>> +                     #size-cells = <1>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
>> +                     status = "disabled";
>> +
>> +                     uart4: serial@200 {
>> +                             compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> +                             reg = <0x200 0x200>;
>> +                             interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
>> +                             clock-names = "usart";
>> +                             atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
> 
> According to dts coding style that vendor specific properties goes at the
> end. I'll adjust it when applying, no need to resend for this. Valid for
> all the uart flexcom nodes.

Thanks Claudiu.
> 
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(8))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(9))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,use-dma-rx;
>> +                             atmel,use-dma-tx;
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +
>> +                     spi4: spi@400 {
>> +                             compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
>> +                             reg = <0x400 0x200>;
>> +                             interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
>> +                             clock-names = "spi_clk";
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(8))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(9))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +
>> +                     i2c4: i2c@600 {
>> +                             compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> +                             reg = <0x600 0x200>;
>> +                             interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(8))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(9))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +             };
>> +
>> +             flx5: flexcom@f0004000 {
>> +                     compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> +                     reg = <0xf0004000 0x200>;
>> +                     ranges = <0x0 0xf0004000 0x800>;
>> +                     #address-cells = <1>;
>> +                     #size-cells = <1>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
>> +                     status = "disabled";
>> +
>> +                     uart5: serial@200 {
>> +                             compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> +                             reg = <0x200 0x200>;
>> +                             interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
>> +                             clock-names = "usart";
>> +                             atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(10))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(11))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,use-dma-rx;
>> +                             atmel,use-dma-tx;
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +
>> +                     spi5: spi@400 {
>> +                             compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
>> +                             reg = <0x400 0x200>;
>> +                             interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
>> +                             clock-names = "spi_clk";
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(10))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(11))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +
>> +                     i2c5: i2c@600 {
>> +                             compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> +                             reg = <0x600 0x200>;
>> +                             interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(10))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(11))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +             };
>> +
>> +             dma0: dma-controller@f0008000 {
>> +                     compatible = "microchip,sam9x7-dma", "atmel,sama5d4-dma";
>> +                     reg = <0xf0008000 0x1000>;
>> +                     interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
>> +                     #dma-cells = <1>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
>> +                     clock-names = "dma_clk";
>> +                     status = "disabled";
>> +             };
>> +
>> +             ssc: ssc@f0010000 {
>> +                     compatible = "microchip,sam9x7-ssc", "atmel,at91sam9g45-ssc";
>> +                     reg = <0xf0010000 0x4000>;
>> +                     interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
>> +                     clock-names = "pclk";
>> +                     dmas = <&dma0
>> +                             (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> +                              AT91_XDMAC_DT_PERID(38))>,
>> +                            <&dma0
>> +                             (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> +                              AT91_XDMAC_DT_PERID(39))>;
>> +                     dma-names = "tx", "rx";
>> +                     status = "disabled";
>> +             };
>> +
>> +             i2s: i2s@f001c000 {
>> +                     compatible = "microchip,sam9x7-i2smcc", "microchip,sam9x60-i2smcc";
>> +                     reg = <0xf001c000 0x100>;
>> +                     interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
>> +                     clock-names = "pclk", "gclk";
>> +                     dmas = <&dma0
>> +                             (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> +                              AT91_XDMAC_DT_PERID(36))>,
>> +                            <&dma0
>> +                             (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> +                              AT91_XDMAC_DT_PERID(37))>;
>> +                     dma-names = "tx", "rx";
>> +                     status = "disabled";
>> +             };
>> +
>> +             flx11: flexcom@f0020000 {
>> +                     compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> +                     reg = <0xf0020000 0x200>;
>> +                     ranges = <0x0 0xf0020000 0x800>;
>> +                     #address-cells = <1>;
>> +                     #size-cells = <1>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
>> +                     status = "disabled";
>> +
>> +                     uart11: serial@200 {
>> +                             compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> +                             reg = <0x200 0x200>;
>> +                             interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
>> +                             clock-names = "usart";
>> +                             atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(22))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(23))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,use-dma-rx;
>> +                             atmel,use-dma-tx;
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +
>> +                     i2c11: i2c@600 {
>> +                             compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> +                             reg = <0x600 0x200>;
>> +                             interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(22))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(23))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +             };
>> +
>> +             flx12: flexcom@f0024000 {
>> +                     compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> +                     reg = <0xf0024000 0x200>;
>> +                     ranges = <0x0 0xf0024000 0x800>;
>> +                     #address-cells = <1>;
>> +                     #size-cells = <1>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
>> +                     status = "disabled";
>> +
>> +                     uart12: serial@200 {
>> +                             compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> +                             reg = <0x200 0x200>;
>> +                             interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
>> +                             clock-names = "usart";
>> +                             atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(24))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(25))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,use-dma-rx;
>> +                             atmel,use-dma-tx;
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +
>> +                     i2c12: i2c@600 {
>> +                             compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> +                             reg = <0x600 0x200>;
>> +                             interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(24))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(25))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +             };
>> +
>> +             pit64b0: timer@f0028000 {
>> +                     compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b";
>> +                     reg = <0xf0028000 0x100>;
>> +                     interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
>> +                     clock-names = "pclk", "gclk";
>> +             };
>> +
>> +             sha: crypto@f002c000 {
>> +                     compatible = "microchip,sam9x7-sha", "atmel,at91sam9g46-sha";
>> +                     reg = <0xf002c000 0x100>;
>> +                     interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
>> +                     clock-names = "sha_clk";
>> +                     dmas = <&dma0
>> +                             (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> +                              AT91_XDMAC_DT_PERID(34))>;
>> +                     dma-names = "tx";
>> +             };
>> +
>> +             trng: rng@f0030000 {
>> +                     compatible = "microchip,sam9x7-trng", "microchip,sam9x60-trng";
>> +                     reg = <0xf0030000 0x100>;
>> +                     interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
>> +                     status = "disabled";
>> +             };
>> +
>> +             aes: crypto@f0034000 {
>> +                     compatible = "microchip,sam9x7-aes", "atmel,at91sam9g46-aes";
>> +                     reg = <0xf0034000 0x100>;
>> +                     interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
>> +                     clock-names = "aes_clk";
>> +                     dmas = <&dma0
>> +                             (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> +                              AT91_XDMAC_DT_PERID(32))>,
>> +                            <&dma0
>> +                             (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> +                              AT91_XDMAC_DT_PERID(33))>;
>> +                     dma-names = "tx", "rx";
>> +             };
>> +
>> +             tdes: crypto@f0038000 {
>> +                     compatible = "microchip,sam9x7-tdes", "atmel,at91sam9g46-tdes";
>> +                     reg = <0xf0038000 0x100>;
>> +                     interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
>> +                     clock-names = "tdes_clk";
>> +                     dmas = <&dma0
>> +                             (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> +                              AT91_XDMAC_DT_PERID(31))>,
>> +                            <&dma0
>> +                             (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> +                              AT91_XDMAC_DT_PERID(30))>;
>> +                     dma-names = "tx", "rx";
>> +             };
>> +
>> +             classd: sound@f003c000 {
>> +                     compatible = "microchip,sam9x7-classd", "atmel,sama5d2-classd";
>> +                     reg = <0xf003c000 0x100>;
>> +                     interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
>> +                     clock-names = "pclk", "gclk";
>> +                     dmas = <&dma0
>> +                             (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> +                              AT91_XDMAC_DT_PERID(35))>;
>> +                     dma-names = "tx";
>> +                     status = "disabled";
>> +             };
>> +
>> +             pit64b1: timer@f0040000 {
>> +                     compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b";
>> +                     reg = <0xf0040000 0x100>;
>> +                     interrupts = <58 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
>> +                     clock-names = "pclk", "gclk";
>> +             };
>> +
>> +             can0: can@f8000000 {
>> +                     compatible = "bosch,m_can";
>> +                     reg = <0xf8000000 0x100>, <0x300000 0x7800>;
>> +                     reg-names = "m_can", "message_ram";
>> +                     interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>,
>> +                                  <68 IRQ_TYPE_LEVEL_HIGH 0>;
>> +                     interrupt-names = "int0", "int1";
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_GCK 29>;
>> +                     clock-names = "hclk", "cclk";
>> +                     assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 29>;
>> +                     assigned-clock-rates = <480000000>, <40000000>;
>> +                     assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
>> +                     bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
>> +                     status = "disabled";
>> +             };
>> +
>> +             can1: can@f8004000 {
>> +                     compatible = "bosch,m_can";
>> +                     reg = <0xf8004000 0x100>, <0x300000 0xbc00>;
>> +                     reg-names = "m_can", "message_ram";
>> +                     interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>,
>> +                                  <69 IRQ_TYPE_LEVEL_HIGH 0>;
>> +                     interrupt-names = "int0", "int1";
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 30>, <&pmc PMC_TYPE_GCK 30>;
>> +                     clock-names = "hclk", "cclk";
>> +                     assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 30>;
>> +                     assigned-clock-rates = <480000000>, <40000000>;
>> +                     assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
>> +                     bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
>> +                     status = "disabled";
>> +             };
>> +
>> +             tcb: timer@f8008000 {
>> +                     compatible = "microchip,sam9x7-tcb","atmel,sama5d2-tcb", "simple-mfd", "syscon";
>> +                     reg = <0xf8008000 0x100>;
>> +                     #address-cells = <1>;
>> +                     #size-cells = <0>;
>> +                     interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_GCK 17>, <&clk32k 0>;
>> +                     clock-names = "t0_clk", "gclk", "slow_clk";
>> +                     status = "disabled";
>> +             };
>> +
>> +             flx6: flexcom@f8010000 {
>> +                     compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> +                     reg = <0xf8010000 0x200>;
>> +                     ranges = <0x0 0xf8010000 0x800>;
>> +                     #address-cells = <1>;
>> +                     #size-cells = <1>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
>> +                     status = "disabled";
>> +
>> +                     uart6: serial@200 {
>> +                             compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> +                             reg = <0x200 0x200>;
>> +                             interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
>> +                             clock-names = "usart";
>> +                             atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(12))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(13))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,use-dma-rx;
>> +                             atmel,use-dma-tx;
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +
>> +                     i2c6: i2c@600 {
>> +                             compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> +                             reg = <0x600 0x200>;
>> +                             interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(12))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(13))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +             };
>> +
>> +             flx7: flexcom@f8014000 {
>> +                     compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> +                     reg = <0xf8014000 0x200>;
>> +                     ranges = <0x0 0xf8014000 0x800>;
>> +                     #address-cells = <1>;
>> +                     #size-cells = <1>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
>> +                     status = "disabled";
>> +
>> +                     uart7: serial@200 {
>> +                             compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> +                             reg = <0x200 0x200>;
>> +                             interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
>> +                             clock-names = "usart";
>> +                             atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(14))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(15))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,use-dma-rx;
>> +                             atmel,use-dma-tx;
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +
>> +                     i2c7: i2c@600 {
>> +                             compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> +                             reg = <0x600 0x200>;
>> +                             interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(14))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(15))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +             };
>> +
>> +             flx8: flexcom@f8018000 {
>> +                     compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> +                     reg = <0xf8018000 0x200>;
>> +                     ranges = <0x0 0xf8018000 0x800>;
>> +                     #address-cells = <1>;
>> +                     #size-cells = <1>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
>> +                     status = "disabled";
>> +
>> +                     uart8: serial@200 {
>> +                             compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> +                             reg = <0x200 0x200>;
>> +                             interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
>> +                             clock-names = "usart";
>> +                             atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(16))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(17))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,use-dma-rx;
>> +                             atmel,use-dma-tx;
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +
>> +                     i2c8: i2c@600 {
>> +                             compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> +                             reg = <0x600 0x200>;
>> +                             interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(16))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(17))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +             };
>> +
>> +             flx0: flexcom@f801c000 {
>> +                     compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> +                     reg = <0xf801c000 0x200>;
>> +                     ranges = <0x0 0xf801c000 0x800>;
>> +                     #address-cells = <1>;
>> +                     #size-cells = <1>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
>> +                     status = "disabled";
>> +
>> +                     uart0: serial@200 {
>> +                             compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> +                             reg = <0x200 0x200>;
>> +                             interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
>> +                             clock-names = "usart";
>> +                             atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(0))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(1))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,use-dma-rx;
>> +                             atmel,use-dma-tx;
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +
>> +                     spi0: spi@400 {
>> +                             compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
>> +                             reg = <0x400 0x200>;
>> +                             interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
>> +                             clock-names = "spi_clk";
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(0))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(1))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +
>> +                     i2c0: i2c@600 {
>> +                             compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> +                             reg = <0x600 0x200>;
>> +                             interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(0))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(1))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +             };
>> +
>> +             flx1: flexcom@f8020000 {
>> +                     compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> +                     reg = <0xf8020000 0x200>;
>> +                     ranges = <0x0 0xf8020000 0x800>;
>> +                     #address-cells = <1>;
>> +                     #size-cells = <1>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
>> +                     status = "disabled";
>> +
>> +                     uart1: serial@200 {
>> +                             compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> +                             reg = <0x200 0x200>;
>> +                             interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
>> +                             clock-names = "usart";
>> +                             atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(2))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(3))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,use-dma-rx;
>> +                             atmel,use-dma-tx;
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +
>> +                     spi1: spi@400 {
>> +                             compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
>> +                             reg = <0x400 0x200>;
>> +                             interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
>> +                             clock-names = "spi_clk";
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(2))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(3))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +
>> +                     i2c1: i2c@600 {
>> +                             compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> +                             reg = <0x600 0x200>;
>> +                             interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(2))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(3))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +             };
>> +
>> +             flx2: flexcom@f8024000 {
>> +                     compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> +                     reg = <0xf8024000 0x200>;
>> +                     ranges = <0x0 0xf8024000 0x800>;
>> +                     #address-cells = <1>;
>> +                     #size-cells = <1>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
>> +                     status = "disabled";
>> +
>> +                     uart2: serial@200 {
>> +                             compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> +                             reg = <0x200 0x200>;
>> +                             interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
>> +                             clock-names = "usart";
>> +                             atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(4))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(5))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,use-dma-rx;
>> +                             atmel,use-dma-tx;
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +
>> +                     spi2: spi@400 {
>> +                             compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
>> +                             reg = <0x400 0x200>;
>> +                             interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
>> +                             clock-names = "spi_clk";
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(4))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(5))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +
>> +                     i2c2: i2c@600 {
>> +                             compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> +                             reg = <0x600 0x200>;
>> +                             interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(4))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(5))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +             };
>> +
>> +             flx3: flexcom@f8028000 {
>> +                     compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> +                     reg = <0xf8028000 0x200>;
>> +                     ranges = <0x0 0xf8028000 0x800>;
>> +                     #address-cells = <1>;
>> +                     #size-cells = <1>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
>> +                     status = "disabled";
>> +
>> +                     uart3: serial@200 {
>> +                             compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> +                             reg = <0x200 0x200>;
>> +                             interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
>> +                             clock-names = "usart";
>> +                             atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(6))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(7))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,use-dma-rx;
>> +                             atmel,use-dma-tx;
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +
>> +                     spi3: spi@400 {
>> +                             compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
>> +                             reg = <0x400 0x200>;
>> +                             interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
>> +                             clock-names = "spi_clk";
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(6))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(7))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +
>> +                     i2c3: i2c@600 {
>> +                             compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> +                             reg = <0x600 0x200>;
>> +                             interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(6))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(7))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +             };
>> +
>> +             gmac: ethernet@f802c000 {
>> +                     compatible = "microchip,sam9x7-gem", "microchip,sama7g5-gem";
>> +                     reg = <0xf802c000 0x1000>;
>> +                     interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>,        /* Queue 0 */
>> +                                  <60 IRQ_TYPE_LEVEL_HIGH 3>,        /* Queue 1 */
>> +                                  <61 IRQ_TYPE_LEVEL_HIGH 3>,        /* Queue 2 */
>> +                                  <62 IRQ_TYPE_LEVEL_HIGH 3>,        /* Queue 3 */
>> +                                  <63 IRQ_TYPE_LEVEL_HIGH 3>,        /* Queue 4 */
>> +                                  <64 IRQ_TYPE_LEVEL_HIGH 3>;        /* Queue 5 */
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_GCK 24>, <&pmc PMC_TYPE_GCK 67>;
>> +                     clock-names = "hclk", "pclk", "tx_clk", "tsu_clk";
>> +                     assigned-clocks = <&pmc PMC_TYPE_GCK 67>;
> 
> Is this needed?

Sorry I missed to add this line under it. This is needed for the PTP 
functionality.

assigned-clock-rates = <266666666>;

I can send another version if you want me to.
> 
>> +                     status = "disabled";
>> +             };
>> +
>> +             pwm0: pwm@f8034000 {
>> +                     compatible = "microchip,sam9x7-pwm", "microchip,sam9x60-pwm";
>> +                     reg = <0xf8034000 0x300>;
>> +                     interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
>> +                     #pwm-cells = <3>;
>> +                     status = "disabled";
>> +             };
>> +
>> +             flx9: flexcom@f8040000 {
>> +                     compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> +                     reg = <0xf8040000 0x200>;
>> +                     ranges = <0x0 0xf8040000 0x800>;
>> +                     #address-cells = <1>;
>> +                     #size-cells = <1>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
>> +                     status = "disabled";
>> +
>> +                     uart9: serial@200 {
>> +                             compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> +                             reg = <0x200 0x200>;
>> +                             interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
>> +                             clock-names = "usart";
>> +                             atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(18))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(19))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,use-dma-rx;
>> +                             atmel,use-dma-tx;
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +
>> +                     i2c9: i2c@600 {
>> +                             compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> +                             reg = <0x600 0x200>;
>> +                             interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(18))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(19))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +             };
>> +
>> +             flx10: flexcom@f8044000 {
>> +                     compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
>> +                     reg = <0xf8044000 0x200>;
>> +                     ranges = <0x0 0xf8044000 0x800>;
>> +                     #address-cells = <1>;
>> +                     #size-cells = <1>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
>> +                     status = "disabled";
>> +
>> +                     uart10: serial@200 {
>> +                             compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> +                             reg = <0x200 0x200>;
>> +                             interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
>> +                             clock-names = "usart";
>> +                             atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(20))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(21))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,use-dma-rx;
>> +                             atmel,use-dma-tx;
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +
>> +                     i2c10: i2c@600 {
>> +                             compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
>> +                             reg = <0x600 0x200>;
>> +                             interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
>> +                             dmas = <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(20))>,
>> +                                    <&dma0
>> +                                     (AT91_XDMAC_DT_MEM_IF(0) |
>> +                                      AT91_XDMAC_DT_PER_IF(1) |
>> +                                      AT91_XDMAC_DT_PERID(21))>;
>> +                             dma-names = "tx", "rx";
>> +                             atmel,fifo-size = <16>;
>> +                             status = "disabled";
>> +                     };
>> +             };
>> +
>> +             sfr: sfr@f8050000 {
>> +                     compatible = "microchip,sam9x7-sfr", "microchip,sam9x60-sfr", "syscon";
>> +                     reg = <0xf8050000 0x100>;
>> +             };
>> +
>> +             matrix: matrix@ffffde00 {
>> +                     compatible = "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon";
>> +                     reg = <0xffffde00 0x200>;
>> +             };
>> +
>> +             pmecc: ecc-engine@ffffe000 {
>> +                     compatible = "microchip,sam9x7-pmecc", "atmel,at91sam9g45-pmecc";
>> +                     reg = <0xffffe000 0x300>, <0xffffe600 0x100>;
>> +             };
>> +
>> +             mpddrc: mpddrc@ffffe800 {
>> +                     compatible = "microchip,sam9x7-ddramc", "atmel,sama5d3-ddramc";
>> +                     reg = <0xffffe800 0x200>;
>> +                     clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
>> +                     clock-names = "ddrck", "mpddr";
>> +             };
>> +
>> +             smc: smc@ffffea00 {
>> +                     compatible = "microchip,sam9x7-smc", "atmel,at91sam9260-smc", "syscon";
>> +                     reg = <0xffffea00 0x100>;
>> +             };
>> +
>> +             aic: interrupt-controller@fffff100 {
>> +                     compatible = "microchip,sam9x7-aic", "microchip,sam9x60-aic";
>> +                     reg = <0xfffff100 0x100>;
>> +                     #interrupt-cells = <3>;
>> +                     interrupt-controller;
>> +                     atmel,external-irqs = <31>;
>> +                     microchip,nr-irqs = <70>;
> 
> Ah, this needs to be clarified before applying.

Can you discard the property and apply the rest (if this version can be 
applied)? I can resolve the irq number related issue in a separate 
series. Maybe fix the compatibles if required.
> 
>> +             };
>> +
>> +             dbgu: serial@fffff200 {
>> +                     compatible = "microchip,sam9x7-dbgu", "atmel,at91sam9260-dbgu", "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
>> +                     reg = <0xfffff200 0x200>;
>> +                     interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                     clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
>> +                     clock-names = "usart";
>> +                     dmas = <&dma0
>> +                             (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> +                              AT91_XDMAC_DT_PERID(28))>,
>> +                            <&dma0
>> +                             (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
>> +                              AT91_XDMAC_DT_PERID(29))>;
>> +                     dma-names = "tx", "rx";
>> +                     atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
>> +                     status = "disabled";
>> +             };
>> +
>> +             pinctrl: pinctrl@fffff400 {
>> +                     compatible = "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl", "simple-mfd";
>> +                     ranges = <0xfffff400 0xfffff400 0x800>;
>> +                     #address-cells = <1>;
>> +                     #size-cells = <1>;
>> +
>> +                     /* mux-mask corresponding to sam9x7 SoC in TFBGA228L package */
>> +                     atmel,mux-mask = <
>> +                                      /*  A          B          C          D   */
>> +                                      0xffffffff 0xffffefc0 0xc0ffd000 0x00000000    /* pioA */
>> +                                      0x07ffffff 0x0805fe7f 0x01ff9f81 0x06078000    /* pioB */
>> +                                      0xffffffff 0x07dfffff 0xfa3fffff 0x00000000    /* pioC */
>> +                                      0x00003fff 0x00003fe0 0x0000003f 0x00000000    /* pioD */
>> +                                      >;
>> +
>> +                     pioA: gpio@fffff400 {
>> +                             compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
>> +                             reg = <0xfffff400 0x200>;
>> +                             interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
>> +                             #interrupt-cells = <2>;
>> +                             interrupt-controller;
>> +                             #gpio-cells = <2>;
>> +                             gpio-controller;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
>> +                     };
>> +
>> +                     pioB: gpio@fffff600 {
>> +                             compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
>> +                             reg = <0xfffff600 0x200>;
>> +                             interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
>> +                             #interrupt-cells = <2>;
>> +                             interrupt-controller;
>> +                             #gpio-cells = <2>;
>> +                             gpio-controller;
>> +                             #gpio-lines = <26>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
>> +                     };
>> +
>> +                     pioC: gpio@fffff800 {
>> +                             compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
>> +                             reg = <0xfffff800 0x200>;
>> +                             interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
>> +                             #interrupt-cells = <2>;
>> +                             interrupt-controller;
>> +                             #gpio-cells = <2>;
>> +                             gpio-controller;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
>> +                     };
>> +
>> +                     pioD: gpio@fffffa00 {
>> +                             compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
>> +                             reg = <0xfffffa00 0x200>;
>> +                             interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
>> +                             #interrupt-cells = <2>;
>> +                             interrupt-controller;
>> +                             #gpio-cells = <2>;
>> +                             gpio-controller;
>> +                             #gpio-lines = <22>;
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
>> +                     };
>> +             };
>> +
>> +             pmc: clock-controller@fffffc00 {
>> +                     compatible = "microchip,sam9x7-pmc", "syscon";
>> +                     reg = <0xfffffc00 0x200>;
>> +                     interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                     #clock-cells = <2>;
>> +                     clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
>> +                     clock-names = "td_slck", "md_slck", "main_xtal";
>> +             };
>> +
>> +             reset_controller: reset-controller@fffffe00 {
>> +                     compatible = "microchip,sam9x7-rstc", "microchip,sam9x60-rstc";
>> +                     reg = <0xfffffe00 0x10>;
>> +                     clocks = <&clk32k 0>;
>> +             };
>> +
>> +             poweroff: poweroff@fffffe10 {
>> +                     compatible = "microchip,sam9x7-shdwc", "microchip,sam9x60-shdwc";
>> +                     reg = <0xfffffe10 0x10>;
>> +                     #address-cells = <1>;
>> +                     #size-cells = <0>;
>> +                     clocks = <&clk32k 0>;
>> +                     atmel,wakeup-rtc-timer;
>> +                     atmel,wakeup-rtt-timer;
>> +                     status = "disabled";
>> +             };
>> +
>> +             rtt: rtc@fffffe20 {
>> +                     compatible = "microchip,sam9x7-rtt", "atmel,at91sam9260-rtt";
>> +                     reg = <0xfffffe20 0x20>;
>> +                     interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                     clocks = <&clk32k 0>;
>> +             };
>> +
>> +             clk32k: clock-controller@fffffe50 {
>> +                     compatible = "microchip,sam9x7-sckc", "microchip,sam9x60-sckc";
>> +                     reg = <0xfffffe50 0x4>;
>> +                     clocks = <&slow_xtal>;
>> +                     #clock-cells = <1>;
>> +             };
>> +
>> +             gpbr: syscon@fffffe60 {
>> +                     compatible = "microchip,sam9x7-gpbr", "atmel,at91sam9260-gpbr", "syscon";
>> +                     reg = <0xfffffe60 0x10>;
>> +             };
>> +
>> +             rtc: rtc@fffffea8 {
>> +                     compatible = "microchip,sam9x7-rtc", "microchip,sam9x60-rtc";
>> +                     reg = <0xfffffea8 0x100>;
>> +                     interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                     clocks = <&clk32k 0>;
>> +             };
>> +
>> +             watchdog: watchdog@ffffff80 {
>> +                     compatible = "microchip,sam9x7-wdt", "microchip,sam9x60-wdt";
>> +                     reg = <0xffffff80 0x24>;
>> +                     interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                     status = "disabled";
>> +             };
>> +     };
>> +};

-- 
Thanks and Regards,
Varshini Rajendran.





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux