Add clock property to TH1520 gpio controller nodes. These clock gates refer to corresponding enable bits in the peripheral clock gate control register. Refer to register PERI_CLK_CFG in section 4.4.2.2.52 of the TH1520 System User Manual. Link: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs Signed-off-by: Drew Fustini <dfustini@xxxxxxxxxxxxxxx> --- arch/riscv/boot/dts/thead/th1520.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi index d05002ad7c96..351e09beab70 100644 --- a/arch/riscv/boot/dts/thead/th1520.dtsi +++ b/arch/riscv/boot/dts/thead/th1520.dtsi @@ -237,6 +237,7 @@ gpio2: gpio@ffe7f34000 { reg = <0xff 0xe7f34000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clk CLK_GPIO2>; portc: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; @@ -255,6 +256,7 @@ gpio3: gpio@ffe7f38000 { reg = <0xff 0xe7f38000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clk CLK_GPIO3>; portd: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; @@ -273,6 +275,7 @@ gpio0: gpio@ffec005000 { reg = <0xff 0xec005000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clk CLK_GPIO0>; porta: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; @@ -291,6 +294,7 @@ gpio1: gpio@ffec006000 { reg = <0xff 0xec006000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clk CLK_GPIO1>; portb: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; -- 2.34.1
