Change the clock property in TH1520 uart nodes to a clock provided by AP_SUBSYS clock controller. Link: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs Signed-off-by: Drew Fustini <dfustini@xxxxxxxxxxxxxxx> --- arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts | 4 ---- .../boot/dts/thead/th1520-lichee-module-4a.dtsi | 4 ---- arch/riscv/boot/dts/thead/th1520.dtsi | 24 +++++++++++----------- 3 files changed, 12 insertions(+), 20 deletions(-) diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts index d9b4de9e4757..164afd18b56c 100644 --- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts +++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts @@ -52,10 +52,6 @@ &sdhci_clk { clock-frequency = <198000000>; }; -&uart_sclk { - clock-frequency = <100000000>; -}; - &dmac0 { status = "okay"; }; diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi index 1365d3a512a3..1b7ede570994 100644 --- a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi +++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi @@ -33,10 +33,6 @@ &sdhci_clk { clock-frequency = <198000000>; }; -&uart_sclk { - clock-frequency = <100000000>; -}; - &dmac0 { status = "okay"; }; diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi index 10a38ed55658..66df04ceb3e4 100644 --- a/arch/riscv/boot/dts/thead/th1520.dtsi +++ b/arch/riscv/boot/dts/thead/th1520.dtsi @@ -141,12 +141,6 @@ apb_clk: apb-clk-clock { #clock-cells = <0>; }; - uart_sclk: uart-sclk-clock { - compatible = "fixed-clock"; - clock-output-names = "uart_sclk"; - #clock-cells = <0>; - }; - sdhci_clk: sdhci-clock { compatible = "fixed-clock"; clock-frequency = <198000000>; @@ -195,7 +189,8 @@ uart0: serial@ffe7014000 { compatible = "snps,dw-apb-uart"; reg = <0xff 0xe7014000 0x0 0x100>; interrupts = <36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_sclk>; + clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART0_PCLK>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; @@ -232,7 +227,8 @@ uart1: serial@ffe7f00000 { compatible = "snps,dw-apb-uart"; reg = <0xff 0xe7f00000 0x0 0x100>; interrupts = <37 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_sclk>; + clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART1_PCLK>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; @@ -242,7 +238,8 @@ uart3: serial@ffe7f04000 { compatible = "snps,dw-apb-uart"; reg = <0xff 0xe7f04000 0x0 0x100>; interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_sclk>; + clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART3_PCLK>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; @@ -324,7 +321,8 @@ uart2: serial@ffec010000 { compatible = "snps,dw-apb-uart"; reg = <0xff 0xec010000 0x0 0x4000>; interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_sclk>; + clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART2_PCLK>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; @@ -386,7 +384,8 @@ uart4: serial@fff7f08000 { compatible = "snps,dw-apb-uart"; reg = <0xff 0xf7f08000 0x0 0x4000>; interrupts = <40 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_sclk>; + clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART4_PCLK>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; @@ -396,7 +395,8 @@ uart5: serial@fff7f0c000 { compatible = "snps,dw-apb-uart"; reg = <0xff 0xf7f0c000 0x0 0x4000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&uart_sclk>; + clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART5_PCLK>; + clock-names = "baudclk", "apb_pclk"; reg-shift = <2>; reg-io-width = <4>; status = "disabled"; -- 2.34.1
