Having pinctrl entries defined for used gpios is helpful as it makes sure the pin isn't used anywhere else. The somewhat similar rk3588-jaguar board has a pinctrl entry already, so add the same for rk3588-tiger. Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx> --- arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi index 4c5be356fa7fe..fb5f1fa25fb9e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi @@ -56,6 +56,8 @@ pcie_refclk: pcie-clock-generator { clock-frequency = <100000000>; clock-output-names = "pcie3_refclk"; enable-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; /* PCIE30X4_CLKREQN_M1_L */ + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x4_clkreqn_m1_l>; vdd-supply = <&vcca_3v3_s0>; }; @@ -339,6 +341,12 @@ module_led_pin: module-led-pin { }; }; + pcie30x4 { + pcie30x4_clkreqn_m1_l: pcie30x4-clkreqn-m1-l { + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + usb3 { usb3_id: usb3-id { rockchip,pins = -- 2.39.2