The PLL_POST_DIV_MASK should be 0 to (width - 1) bits. Fix it.
Also, correct the pll postdiv shift used in trion pll postdiv
set rate API. The shift value is not same for different types of
plls and should be taken from the pll's .post_div_shift member.
Fixes: 1c3541145cbf ("clk: qcom: support for 2 bit PLL post divider")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
---
drivers/clk/qcom/clk-alpha-pll.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 8a412ef47e16..6107c144c0f5 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -40,7 +40,7 @@
#define PLL_USER_CTL(p) ((p)->offset + (p)->regs[PLL_OFF_USER_CTL])
# define PLL_POST_DIV_SHIFT 8
-# define PLL_POST_DIV_MASK(p) GENMASK((p)->width, 0)
+# define PLL_POST_DIV_MASK(p) GENMASK((p)->width - 1, 0)
# define PLL_ALPHA_EN BIT(24)
# define PLL_ALPHA_MODE BIT(25)
# define PLL_VCO_SHIFT 20
@@ -1496,8 +1496,8 @@ clk_trion_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
}
return regmap_update_bits(regmap, PLL_USER_CTL(pll),
- PLL_POST_DIV_MASK(pll) << PLL_POST_DIV_SHIFT,
- val << PLL_POST_DIV_SHIFT);
+ PLL_POST_DIV_MASK(pll) << pll->post_div_shift,
+ val << pll->post_div_shift);
}
const struct clk_ops clk_alpha_pll_postdiv_trion_ops = {
--
2.25.1
