Replace the deprecated snps,reset-xxx bindings to the generic Ethernet PHY reset GPIO bindings. Also updates the delays based on the vendor recommendations. Fixes: b9f8ca655d80 ("arm64: dts: rockchip: Add Lunzn Fastrhino R68S") Signed-off-by: Chukun Pan <amadeus@xxxxxxxxxx> --- .../boot/dts/rockchip/rk3568-fastrhino-r68s.dts | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts index ce2a5e1ccefc..02d966d218fd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts @@ -39,10 +39,6 @@ &gmac0_tx_bus2 &gmac0_rx_bus2 &gmac0_rgmii_clk &gmac0_rgmii_bus>; - snps,reset-gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - /* Reset time is 15ms, 50ms for rtl8211f */ - snps,reset-delays-us = <0 15000 50000>; tx_delay = <0x3c>; rx_delay = <0x2f>; status = "okay"; @@ -61,10 +57,6 @@ &gmac1m1_tx_bus2 &gmac1m1_rx_bus2 &gmac1m1_rgmii_clk &gmac1m1_rgmii_bus>; - snps,reset-gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - /* Reset time is 15ms, 50ms for rtl8211f */ - snps,reset-delays-us = <0 15000 50000>; tx_delay = <0x4f>; rx_delay = <0x26>; status = "okay"; @@ -76,6 +68,9 @@ rgmii_phy0: ethernet-phy@1 { reg = <0x1>; pinctrl-0 = <ð_phy0_reset_pin>; pinctrl-names = "default"; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; }; }; @@ -85,6 +80,9 @@ rgmii_phy1: ethernet-phy@1 { reg = <0x1>; pinctrl-0 = <ð_phy1_reset_pin>; pinctrl-names = "default"; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; }; }; -- 2.25.1