On 28/06/2024 20:32, Vikram Sharma wrote:
> Enable IMX577 camera sensor for qcs6490-rb3gen2.
>
> Signed-off-by: Hariram Purushothaman <quic_hariramp@xxxxxxxxxxx>
> Signed-off-by: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 67 ++++++++++++++++++++++++++++
> 1 file changed, 67 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> index c4cde4328e3d..237231600dca 100644
> --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> @@ -513,6 +513,73 @@ vreg_bob_3p296: bob {
> };
> };
>
> +&camcc {
> + status = "okay";
> +};
> +
> +&camss {
> + status = "disabled";
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* The port index denotes CSIPHY id i.e. csiphy2 */
> + port@3 {
> + reg = <3>;
> + csiphy3_ep: endpoint {
> + clock-lanes = <7>;
> + data-lanes = <0 1 2 3>;
> + remote-endpoint = <&imx412_ep>;
> + };
> + };
> + };
> +};
> +
> +&cci0 {
> + status = "okay";
> +};
> +
> +&cci1 {
> + status = "okay";
> +};
> +
> +&cci1_i2c1 {
> + camera@1a {
> + /*
> + * rb3gen2 ships with an imx577. qcom treats imx412
> + * and imx577 the same way. Absent better data do the same here.
NAK, how qcom treats incorrect code, is not an correct argument.
Use correct compatibles and correct bindings.
> + */
> + compatible = "sony,imx412";
> + reg = <0x1a>;
> +
> + reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default", "suspend";
> + pinctrl-0 = <&cam2_default>;
> + pinctrl-1 = <&cam2_suspend>;
> +
> + clocks = <&camcc CAM_CC_MCLK3_CLK>,
> + <&camcc CAM_CC_MCLK2_CLK>;
> + assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>,
> + <&camcc CAM_CC_MCLK2_CLK>;
> + assigned-clock-rates = <24000000>,
> + <24000000>;
> +
> + dovdd-supply = <&vreg_l18b_1p8>;
> + /* avdd-supply = <&vdc_5v>;
> + * dvdd-supply = <&vdc_5v>;
What's this?
Best regards,
Krzysztof
