Enable IMX577 camera sensor for qcs6490-rb3gen2.
Signed-off-by: Hariram Purushothaman <quic_hariramp@xxxxxxxxxxx>
Signed-off-by: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 67 ++++++++++++++++++++++++++++
1 file changed, 67 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index c4cde4328e3d..237231600dca 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -513,6 +513,73 @@ vreg_bob_3p296: bob {
};
};
+&camcc {
+ status = "okay";
+};
+
+&camss {
+ status = "disabled";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* The port index denotes CSIPHY id i.e. csiphy2 */
+ port@3 {
+ reg = <3>;
+ csiphy3_ep: endpoint {
+ clock-lanes = <7>;
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&imx412_ep>;
+ };
+ };
+ };
+};
+
+&cci0 {
+ status = "okay";
+};
+
+&cci1 {
+ status = "okay";
+};
+
+&cci1_i2c1 {
+ camera@1a {
+ /*
+ * rb3gen2 ships with an imx577. qcom treats imx412
+ * and imx577 the same way. Absent better data do the same here.
+ */
+ compatible = "sony,imx412";
+ reg = <0x1a>;
+
+ reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default", "suspend";
+ pinctrl-0 = <&cam2_default>;
+ pinctrl-1 = <&cam2_suspend>;
+
+ clocks = <&camcc CAM_CC_MCLK3_CLK>,
+ <&camcc CAM_CC_MCLK2_CLK>;
+ assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>,
+ <&camcc CAM_CC_MCLK2_CLK>;
+ assigned-clock-rates = <24000000>,
+ <24000000>;
+
+ dovdd-supply = <&vreg_l18b_1p8>;
+ /* avdd-supply = <&vdc_5v>;
+ * dvdd-supply = <&vdc_5v>;
+ */
+
+ port {
+ imx412_ep: endpoint {
+ clock-lanes = <7>;
+ link-frequencies = /bits/ 64 <600000000>;
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&csiphy3_ep>;
+ };
+ };
+ };
+};
+
&gcc {
protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
<GCC_MSS_CFG_AHB_CLK>,
--
2.25.1
