This is a new iteration on the Mobileye system-controller series [0]. It has been split into separate series to facilitate merging. This series adds a driver handling EyeQ5 (and only EyeQ5, not EyeQ6L nor EyeQ6H) SoC pin config and muxing. It is an auxiliary driver being instantiated by the platform clk driver. Related series are targeted at clk [1], reset [2] and MIPS [3]. Have a nice day, Théo [0]: https://lore.kernel.org/lkml/20240620-mbly-olb-v3-0-5f29f8ca289c@xxxxxxxxxxx/ [1]: https://lore.kernel.org/lkml/20240628-mbly-clk-v1-0-edb1e29ea4c1@xxxxxxxxxxx/ [2]: https://lore.kernel.org/lkml/20240628-mbly-reset-v1-0-2a8294fd4392@xxxxxxxxxxx/ [3]: https://lore.kernel.org/lkml/20240628-mbly-mips-v1-0-f53f5e4c422b@xxxxxxxxxxx/ Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx> --- Changes since OLB v3 [0]: - MAINTAINERS: Move changes into a separate commit to avoid merge conflicts. This commit is in the MIPS series [3]. - dt-bindings: Take Reviewed-by: Rob Herring and Linus Walleij. - Kconfig: do not depend on COMMON_CLK_EYEQ. This symbol is not defined in this series, it is defined in the clk series [1]. - Kconfig: do depend on AUXILIARY_BUS. - Kconfig: remove outdated "select MFD_SYSCON". - driver: remove "#include <linux/platform_device.h>". --- Théo Lebrun (2): Revert "dt-bindings: pinctrl: mobileye,eyeq5-pinctrl: add bindings" pinctrl: eyeq5: add platform driver .../bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml | 242 --------- drivers/pinctrl/Kconfig | 14 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-eyeq5.c | 575 +++++++++++++++++++++ 4 files changed, 590 insertions(+), 242 deletions(-) --- base-commit: f2661062f16b2de5d7b6a5c42a9a5c96326b8454 change-id: 20240628-mbly-pinctrl-bf76bf390a7c Best regards, -- Théo Lebrun <theo.lebrun@xxxxxxxxxxx>