The production DH i.MX8MP DHCOM SoM rev.200 uses updated PHY MDIO addresses
for the Fast ethernet PHYs. Update the base SoM DT to cater for this change.
Prototype rev.100 SoM was never publicly available and was manufactured in
limited series, anything currently available is rev.200 or newer, so it is
safe to update the DT this way.
Signed-off-by: Marek Vasut <marex@xxxxxxx>
---
Cc: Andrew Lunn <andrew@xxxxxxx>
Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: Fabio Estevam <festevam@xxxxxxxxx>
Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: imx@xxxxxxxxxxxxxxx
Cc: kernel@xxxxxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
---
V2: Update the commit message, rev.100 SoM was a prototype that is not available
---
arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index 848df53c48685..4f7721a44daaa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -110,14 +110,14 @@ mdio {
#size-cells = <0>;
/* Up to one of these two PHYs may be populated. */
- ethphy0f: ethernet-phy@0 { /* SMSC LAN8740Ai */
+ ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */
compatible = "ethernet-phy-id0007.c110",
"ethernet-phy-ieee802.3-c22";
interrupt-parent = <&gpio3>;
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&pinctrl_ethphy0>;
pinctrl-names = "default";
- reg = <0>;
+ reg = <1>;
reset-assert-us = <1000>;
reset-deassert-us = <1000>;
reset-gpios = <&ioexp 4 GPIO_ACTIVE_LOW>;
@@ -156,14 +156,14 @@ mdio {
#size-cells = <0>;
/* Up to one PHY may be populated. */
- ethphy1f: ethernet-phy@1 { /* SMSC LAN8740Ai */
+ ethphy1f: ethernet-phy@2 { /* SMSC LAN8740Ai */
compatible = "ethernet-phy-id0007.c110",
"ethernet-phy-ieee802.3-c22";
interrupt-parent = <&gpio4>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&pinctrl_ethphy1>;
pinctrl-names = "default";
- reg = <1>;
+ reg = <2>;
reset-assert-us = <1000>;
reset-deassert-us = <1000>;
reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
--
2.43.0
