Hi Uwe
On 6/13/24 10:02, Uwe Kleine-König wrote:
To simplify identifying the pins where the PWM output is routed to,
add a comment to each PWM device about the respective pin on the
expansion connector.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
---
arch/arm/boot/dts/st/stm32mp135f-dk.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
index 567e53ad285f..f1b50e4c1059 100644
--- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
@@ -273,6 +273,7 @@ &timers3 {
/delete-property/dma-names;
status = "disabled";
pwm {
+ /* PWM output on pin 7 of the expansion connector (CN8.7) using TIM3_CH4 function */
pinctrl-0 = <&pwm3_pins_a>;
pinctrl-1 = <&pwm3_sleep_pins_a>;
pinctrl-names = "default", "sleep";
@@ -288,6 +289,7 @@ &timers4 {
/delete-property/dma-names;
status = "disabled";
pwm {
+ /* PWM output on pin 31 of the expansion connector (CN8.31) using TIM4_CH2 function */
pinctrl-0 = <&pwm4_pins_a>;
pinctrl-1 = <&pwm4_sleep_pins_a>;
pinctrl-names = "default", "sleep";
@@ -303,6 +305,7 @@ &timers8 {
/delete-property/dma-names;
status = "disabled";
pwm {
+ /* PWM output on pin 32 of the expansion connector (CN8.32) using TIM8_CH3 function */
pinctrl-0 = <&pwm8_pins_a>;
pinctrl-1 = <&pwm8_sleep_pins_a>;
pinctrl-names = "default", "sleep";
@@ -316,6 +319,7 @@ timer@7 {
&timers14 {
status = "disabled";
pwm {
+ /* PWM output on pin 33 of the expansion connector (CN8.33) using TIM14_CH1 function */
pinctrl-0 = <&pwm14_pins_a>;
pinctrl-1 = <&pwm14_sleep_pins_a>;
pinctrl-names = "default", "sleep";
base-commit: 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0
Good idea. Some lines exceed the 100 char. I could remove "function" or
only keep "func" instead. What do u think ?
Note also that commit should be: "ARM: dts: stm32: ....". i can fix it
by myself.
Alex
