To simplify identifying the pins where the PWM output is routed to, add a comment to each PWM device about the respective pin on the expansion connector. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx> --- arch/arm/boot/dts/st/stm32mp135f-dk.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts index 567e53ad285f..f1b50e4c1059 100644 --- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts +++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts @@ -273,6 +273,7 @@ &timers3 { /delete-property/dma-names; status = "disabled"; pwm { + /* PWM output on pin 7 of the expansion connector (CN8.7) using TIM3_CH4 function */ pinctrl-0 = <&pwm3_pins_a>; pinctrl-1 = <&pwm3_sleep_pins_a>; pinctrl-names = "default", "sleep"; @@ -288,6 +289,7 @@ &timers4 { /delete-property/dma-names; status = "disabled"; pwm { + /* PWM output on pin 31 of the expansion connector (CN8.31) using TIM4_CH2 function */ pinctrl-0 = <&pwm4_pins_a>; pinctrl-1 = <&pwm4_sleep_pins_a>; pinctrl-names = "default", "sleep"; @@ -303,6 +305,7 @@ &timers8 { /delete-property/dma-names; status = "disabled"; pwm { + /* PWM output on pin 32 of the expansion connector (CN8.32) using TIM8_CH3 function */ pinctrl-0 = <&pwm8_pins_a>; pinctrl-1 = <&pwm8_sleep_pins_a>; pinctrl-names = "default", "sleep"; @@ -316,6 +319,7 @@ timer@7 { &timers14 { status = "disabled"; pwm { + /* PWM output on pin 33 of the expansion connector (CN8.33) using TIM14_CH1 function */ pinctrl-0 = <&pwm14_pins_a>; pinctrl-1 = <&pwm14_sleep_pins_a>; pinctrl-names = "default", "sleep"; base-commit: 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0 -- 2.43.0