The previous patch adding support for this panel [1] referred to previously by its serial number only. As discussed after the patch was committed, the preference is to use the integrating device vendor and name in this circumstance. This series corrects the panel compatible to reflect the vendor (Anbernic, already in the vendor prefix table), updates the NV3052C panel driver with the new compatible, and lastly adds num-chipselects and sck-gpios to the DT binding example, identified by make dt_bindings_check as required for bit-banged SPI over GPIO lines. Regards, Ryan [1] https://lore.kernel.org/dri-devel/20240530211415.44201-1-ryan@xxxxxxxxxxxxx/ Ryan Walklin (3): dt-bindings: display: panel: Rename WL-355608-A8 panel drm: panel: nv3052c: Correct WL-355608-A8 panel compatible dt-bindings: display: panel: correct Anbernic RG35XX panel example .../{wl-355608-a8.yaml => anbernic,rg35xx-panel.yaml} | 11 +++++++---- drivers/gpu/drm/panel/panel-newvision-nv3052c.c | 2 +- 2 files changed, 8 insertions(+), 5 deletions(-) rename Documentation/devicetree/bindings/display/panel/{wl-355608-a8.yaml => anbernic,rg35xx-panel.yaml} (76%) -- 2.45.2
