Fix the following warnings that are thrown when building dtbs with W=1:
../arch/arm64/boot/dts/ti/k3-am62p5-sk.dts:367.10-376.6: Warning (graph_child_address): /bus@f0000/i2c@20000000/usb-power-controller@3f/connector/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
../arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi:647.22-657.5: Warning (graph_child_address): /bus@f0000/usb@f900000/usb@31000000: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
also defined at ../arch/arm64/boot/dts/ti/k3-am62p5-sk.dts:517.7-528.3
Cc: Roger Quadros <rogerq@xxxxxxxxxx>
Signed-off-by: Dhruva Gole <d-gole@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 16 ++++------------
1 file changed, 4 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index fb980d46e304..ff65955551a3 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -364,14 +364,9 @@ connector {
self-powered;
data-role = "dual";
power-role = "sink";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- usb_con_hs: endpoint {
- remote-endpoint = <&usb0_hs_ep>;
- };
+ port {
+ usb_con_hs: endpoint {
+ remote-endpoint = <&usb0_hs_ep>;
};
};
};
@@ -516,11 +511,8 @@ &usbss1 {
&usb0 {
usb-role-switch;
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
+ port {
usb0_hs_ep: endpoint {
remote-endpoint = <&usb_con_hs>;
};
--
2.34.1
