The PinePhone Pro has a vibrator attached via GPIO so
lets enable it.
Signed-off-by: Peter Robinson <pbrobinson@xxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
index fbaf0202df632..8c2a4aaa635d0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
@@ -137,6 +137,12 @@ vcc1v8_codec: vcc1v8-codec-regulator {
vin-supply = <&vcc3v3_sys>;
};
+ vibrator {
+ compatible = "gpio-vibrator";
+ enable-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
+ vcc-supply = <&vcc3v3_sys>;
+ };
+
wifi_pwrseq: sdio-wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rk818 1>;
--
2.45.2
