On Tue, 18 Jun 2024 18:32:20 +0100 Conor Dooley <conor@xxxxxxxxxx> wrote: > On Tue, Jun 18, 2024 at 05:33:16PM +0200, Guillaume Stols wrote: > > > > On 6/18/24 17:12, Conor Dooley wrote: > > > On Tue, Jun 18, 2024 at 02:02:36PM +0000, Guillaume Stols wrote: > > > > Add voltage supplies > > > Are these available on all devices? > > > > Yes all chips from AD7606 series (including AD7606B, AD7606C(-16,-18), > > AD7605-4, AD7606 (-4,-8,-6), AD7607, AD7608, AD7609), as well as AD7616 > > have a VDrive pin, as well as a RefSelect + RefIn/RefOut pin that takes > > an input voltage in case RefSelect is high, or outputs the internal > > reference voltage if RefSelect is low. > > Okay, > Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> > provided that... Sounds like vdrive-supply is a requirement for the device to function but refin may be optional. So add vdrive-supply to the required property list. Note the binding for supplies reflects what must be wired and ignores the ability of the linux regulator framework to get fake supplies when they are not provided in DT. > > > > > > > > > > Signed-off-by: Guillaume Stols <gstols@xxxxxxxxxxxx> > > > > --- > > > > Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 9 +++++++++ > > > > 1 file changed, 9 insertions(+) > > > > > > > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml > > > > index 80866940123c..e480c9a7c7ca 100644 > > > > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml > > > > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml > > > > @@ -35,6 +35,15 @@ properties: > > > > avcc-supply: true > > > > + vdrive-supply: > > The lack of a blank line here is an artifact of the reply > > > > > + description: > > > > + Determines the voltage level at which the interface logic pins will > > > > + operate. > > > > + > > > > + refin-supply: > > > > + description: > > > > + The voltage supply for optional external reference voltage. > > > > + > > > > interrupts: > > > > description: > > > > The BUSY pin falling edge indicates that the conversion is over, and thus > > > > > > > > -- > > > > 2.34.1 > > > >
