Re: [PATCH v3 1/3] dt-bindings: iio: adc: add a7779 doc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 19 Jun 2024 18:42:31 +0100
Conor Dooley <conor@xxxxxxxxxx> wrote:

> On Wed, Jun 19, 2024 at 03:20:44PM +0300, Ramona Alexandra Nechita wrote:
> > Add dt bindings for adc ad7779.
> > 
> > Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
> > ---
> >  .../bindings/iio/adc/adi,ad7779.yaml          | 84 +++++++++++++++++++
> >  1 file changed, 84 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml
> > new file mode 100644
> > index 000000000000..f1eec656acec
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml
> > @@ -0,0 +1,84 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/adc/adi,ad7779.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Analog Devices AD777X family 8-Channel, 24-Bit, Simultaneous Sampling ADCs
> > +
> > +maintainers:
> > +  - Ramona Nechita <ramona.nechita@xxxxxxxxxx>
> > +
> > +description: |
> > +  The AD777X family consist of 8-channel, simultaneous sampling analog-to-
> > +  digital converter (ADC). Eight full Σ-Δ ADCs are on-chip. The
> > +  AD7771 provides an ultralow input current to allow direct sensor
> > +  connection. Each input channel has a programmable gain stage
> > +  allowing gains of 1, 2, 4, and 8 to map lower amplitude sensor
> > +  outputs into the full-scale ADC input range, maximizing the
> > +  dynamic range of the signal chain.
> > +
> > +  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7770.pdf
> > +  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7771.pdf
> > +  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7779.pdf
> > +
> > +$ref: /schemas/spi/spi-peripheral-props.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - adi,ad7770
> > +      - adi,ad7771
> > +      - adi,ad7779
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  '#address-cells':
> > +    const: 1
> > +
> > +  '#size-cells':
> > +    const: 0  
> 
> Why does this device have address/size cells, but not have any child
> nodes? Are you missing some channel child nodes? If you don't have
> children, you don't need these properties.
> 
> Also, your patch is still not threaded with the other 2 patches in the
> series (I see 1/3 in the subject). Where are those patches?

Yeah, I have 3 copies of the cover letter, one with patch 1, one with patch 2,
one on it's own and a stray patch 3 and patchwork has failed to figure
it out...  Can one of the other Analog devices folk help Ramona get a
working confirmation for sending patches please.

The b4 gateway is a good option if no one has the magic config incantation
to get emails out of a particular corporate network.

> 
> Thanks,
> Conor.
> 
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  vref-supply:
> > +    description:
> > +      ADC reference voltage supply

I assume there is at least one more supply?  They should all
be listed in here and those that 'must' be turned on for the
device to function should be in required.  If it's optional, then
add to the description what happens if it isn't supplied. Typically that's
for reference supplies where the device has another option such as an internal
reference.

Jonathan

> > +
> > +  start-gpios:
> > +    description:
> > +      Pin that controls start synchronization pulse.
> > +    maxItems: 1
> > +
> > +  reset-gpios:
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +- |
> > +  #include <dt-bindings/gpio/gpio.h>
> > +  spi {
> > +      #address-cells = <1>;
> > +      #size-cells = <0>;
> > +
> > +      adc@0 {
> > +        compatible = "adi,ad7779";
> > +        reg = <0>;
> > +        vref-supply = <&vref>;
> > +        start-gpios = <&gpio0 87 GPIO_ACTIVE_LOW>;
> > +        reset-gpios = <&gpio0 93 GPIO_ACTIVE_LOW>;
> > +        clocks = <&adc_clk>;
> > +      };
> > +  };
> > +...
> > -- 
> > 2.43.0
> >   






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux