On 03/02/15 20:25, Bjorn Andersson wrote: > - config.of_node = pdev->dev.of_node; > +static int rpm_reg_probe(struct platform_device *pdev) > +{ > + const struct rpm_regulator_data *reg; > + const struct of_device_id *match; > + struct regulator_config config = { }; > + struct regulator_dev *rdev; > + struct qcom_rpm_reg *vreg; > > - ret = rpm_reg_of_parse(pdev->dev.of_node, &vreg->desc, > - &config, initdata); > - if (ret) > - return ret; > + match = of_match_device(rpm_of_match, &pdev->dev); > + for (reg = match->data; reg->name; reg++) { How does this work for the case where we may not want to add all the regulators that a PMIC supports. I'm mostly thinking about the case where we want to use the pm8xxx-regulator driver for a few regulators and so we omit them from the DT for the RPM regulators. -Stephen > + vreg = devm_kmalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL); > + if (!vreg) { > + dev_err(&pdev->dev, "failed to allocate vreg\n"); > + return -ENOMEM; > + } > + memcpy(vreg, reg->template, sizeof(*vreg)); > + mutex_init(&vreg->lock); > + > + vreg->dev = &pdev->dev; > + vreg->resource = reg->resource; > + > + vreg->desc.id = -1; > + vreg->desc.owner = THIS_MODULE; > + vreg->desc.type = REGULATOR_VOLTAGE; > + vreg->desc.name = reg->name; > + vreg->desc.supply_name = reg->supply; > + vreg->desc.of_match = reg->name; > + vreg->desc.of_parse_cb = rpm_reg_of_parse; > + > + vreg->rpm = dev_get_drvdata(pdev->dev.parent); > + if (!vreg->rpm) { > + dev_err(&pdev->dev, "unable to retrieve handle to rpm\n"); > + return -ENODEV; > + } > > - rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config); > - if (IS_ERR(rdev)) { > - dev_err(&pdev->dev, "can't register regulator\n"); > - return PTR_ERR(rdev); > + config.dev = &pdev->dev; > + config.driver_data = vreg; > + rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config); > + if (IS_ERR(rdev)) { > + dev_err(&pdev->dev, "can't register regulator\n"); > + return PTR_ERR(rdev); > + } > } > > return 0; -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html