The example is not able to actually test the schema since it uses a wrong compatible 'rockchip,rk808' instead of 'rockchip,rk809'. Use the correct compatible and drop the wrong properties in the example section so that dt_binding_check passes. Fixes: 6c38ca03406e ("dt-bindings: mfd: rk808: Convert bindings to yaml") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx> --- Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml index 839c0521f1e5..a327d73f3c43 100644 --- a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml @@ -126,11 +126,10 @@ examples: #address-cells = <1>; #size-cells = <0>; - rk808: pmic@1b { - compatible = "rockchip,rk808"; + pmic@1b { + compatible = "rockchip,rk809"; reg = <0x1b>; #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; interrupt-parent = <&gpio3>; interrupts = <10 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; @@ -146,9 +145,6 @@ examples: vcc7-supply = <&vcc_sysin>; vcc8-supply = <&vcc3v3_sys>; vcc9-supply = <&vcc_sysin>; - vcc10-supply = <&vcc_sysin>; - vcc11-supply = <&vcc_sysin>; - vcc12-supply = <&vcc3v3_sys>; regulators { vdd_center: DCDC_REG1 { -- 2.45.2