Enable sound and modem for the GPLUS FL8005A.
The setup is similar to most MSM8916 devices, i.e.:
- QDSP6 audio
- Earpiece/headphones/microphones via digital/analog codec in
MSM8916/PM8916
- WWAN Internet via BAM-DMUX
Signed-off-by: "Lin, Meng-Bo" <linmengbo06890@xxxxxxxxx>
---
.../boot/dts/qcom/msm8916-gplus-fl8005a.dts | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
index b748d140b52e..e6ed5544a11b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
@@ -3,6 +3,7 @@
/dts-v1/;
#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
@@ -111,6 +112,17 @@ &blsp_uart2 {
status = "okay";
};
+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_codec {
+ qcom,micbias-lvl = <2800>;
+ qcom,mbhc-vthreshold-low = <150 180 237 450 500>;
+ qcom,mbhc-vthreshold-high = <150 180 237 450 500>;
+ qcom,hphl-jack-type-normally-open;
+};
+
&pm8916_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
@@ -141,6 +153,14 @@ &sdhc_2 {
status = "okay";
};
+&sound {
+ model = "msm8916-1mic";
+ audio-routing =
+ "AMIC1", "MIC BIAS External1",
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS External1";
+};
+
&usb {
extcon = <&usb_id>, <&usb_id>;
status = "okay";
--
2.39.2
