Hi,
On Fri, Jun 14, 2024 at 2:00 PM Nícolas F. R. A. Prado
<nfraprado@xxxxxxxxxxxxx> wrote:
>
> Currently the keyboard backlight is described in the common
> sc7180-trogdor dtsi as an led node below a pwmleds node, and the led
> node is set to disabled. Only the boards that have a keyboard backlight
> enable it.
>
> However, since the parent pwmleds node is still enabled everywhere, even
> on boards that don't have keyboard backlight it is probed and fails,
> resulting in an error:
>
> leds_pwm pwmleds: probe with driver leds_pwm failed with error -22
>
> as well as a failure in the DT kselftest:
>
> not ok 45 /pwmleds
>
> Fix this by controlling the status of the parent pwmleds node instead of
> the child led, based on the presence of keyboard backlight. This is what
> is done on sc7280 already.
>
> While at it add a missing blank line before the child node to follow the
> coding style.
>
> Fixes: 7ec3e67307f8 ("arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt")
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts | 2 +-
> arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts | 2 +-
> arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts | 2 +-
> arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts | 2 +-
> arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts | 2 +-
> arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts | 2 +-
> arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts | 2 +-
> arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts | 2 +-
> arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 5 +++--
> 9 files changed, 11 insertions(+), 10 deletions(-)
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
