On 03/02/2015 09:07 PM, Bryan Wu wrote:
On Mon, Mar 2, 2015 at 1:15 AM, Sakari Ailus <sakari.ailus@xxxxxx> wrote:
H Ingi,
On Mon, Mar 02, 2015 at 04:14:39PM +0900, Ingi Kim wrote:
Hi Jacek
On 2015년 02월 27일 17:42, Jacek Anaszewski wrote:
Hi Ingi,
On 02/27/2015 02:01 AM, Ingi Kim wrote:
This patch supports KTD2692 flash LED driver
Ingi Kim (3):
of: Add vendor prefix for Kinetic technologies
leds: ktd2692: add device tree bindings for ktd2692
leds: Add ktd2692 flash LED driver
.../devicetree/bindings/leds/leds-ktd2692.txt | 19 ++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
drivers/leds/Kconfig | 8 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-ktd2692.c | 245 ++++++++++++++++++++
5 files changed, 274 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt
create mode 100644 drivers/leds/leds-ktd2692.c
In your device tree binding documentation there is torch-gpio mentioned,
but you seem not to use it in the driver.
We have already LED Flash class (/drivers/leds/led-class-flash.c) for
this type of devices, which handles both torch and flash modes
(flash_strobe sysfs attribute is provided for strobing the flash).
The reference drivers using LED Flash class are still pending [1], but I
think that at least leds-aat1290 driver is almost ready for merging.
It controls very similar device to yours.
Another advantage of using LED Flash class is that it has been designed
to be compatible with Video for Linux 2 subsystem, which will allow for registering LED Flash class devices as a V4L2 sub-devices.
Adding Sakari.
Ok, I'll check LED Flash class, and add torch-gpio
Many LED flash chips include a hardware pin for torch control but few really
need it. If you don't, i.e. you can implement the torch using the control bus
instead, I think I'd probably drop it from the chip's DT bindings.
Ingi, please follow Jacek's advice to use LED Flash class interface.
I'm reviewing those leds flash drivers and probably merge them soon.
Bryan please hold on with merging them as I am about to send new patch
set, as we've agreed that synchronized strobe feature should be removed
from the LED Flash class. There will be also some tweaking around
aat1290 DT bindings.
--
Best Regards,
Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
