[PATCH 0/6] clk: thead: Add support for TH1520 AP_SUBSYS clock controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series adds support for the AP sub-system clock controller in the
T-Head TH1520 [1]. Yangtao Li originally submitted this series in May
2023 [2]. Jisheng made additional improvements and then passed on the
work in progress to me.

Changes in v1:
 - Split th1520_clks into groups for gate, mux, div, pll
 - Convert gate clocks to devm_clk_hw_register_gate_parent_data()
 - Convert mux clocks to devm_clk_hw_register_mux_parent_data_table()
 - Split the PLL recalculation into th1520_pll_vco_recalc_rate() and
   th1520_pll_postdiv_recalc_rate(). Based on Emil's comments in v1,
   add logic to handle the fractional portion of feedback divide value
   when the delta-sigma modulator (DSM) is active.
 - Drop clock-names from the binding per Stephan to avoid relying on
   anything other than the cell index when describing clk_parent_data
   (note: I dropped Rob's Rb because I changed the binding patch)
 - Rename reg/reg2 to cfg0/cfg1 to match the SoC documentation
 - Rename struct for pll clocks from ccu_mdiv to ccu_pll
 - Rebase on v6.10-rc3, remove the dts node reordering patch from v3
   now that it is in mainline

Changes in RFC v3 [3]:
 - Drop redundant new line and unused clk label from the dts example in
   the DT binding which I failed to fix in v2.
 - Add patch [4] from Thomas Bonnefille that fixes dts node ordering in
   th1520.dtsi. Conor has already merged it into riscv-dt-for-next so
   the dts patches in this series are based on top of that.
 - Remove fixed uart clock and converted uart DT nodes to use clocks
   from the clock controller.
 - Remove fixed apb clock and converted the dma controller and timer DT
   nodes to use a clock from the clock controller.
 - Made ccu_disable_helper() and ccu_enable_helper() to static functions
 - Follow the advice from Stephen Boyd in Yangtao's original series to
   not use strings for clk tree topology. Created clk_parent_data arrays
   to be used with CLK_HW_INIT_PARENTS_DATA instead of parent strings.
 - Rebase on top of v6.9-rc7

Changes in RFC v2 [5]:
 - squash the header file patch into the DT schema patch
 - describe the changes I made to original series in the cover letter
   instead of the individual patches
 - fix my typo in my email address

Changes in RFC v1 [6] from the original series:
 - corrected the npu_clk enable bit
 - deduplicated CLK_NPU and CLK_NPU_AXI number in header
 - fixed c910_i0_clk reg typo
 - fixed checkpatch and dt_binding_check warnings
 - rebased on v6.9-rc5
 - revised commit descriptions

Thank you,
Drew

[1] https://openbeagle.org/beaglev-ahead/beaglev-ahead/-/blob/main/docs/TH1520%20System%20User%20Manual.pdf
[2] https://lore.kernel.org/all/20230515054402.27633-1-frank.li@xxxxxxxx/
[3] https://lore.kernel.org/all/20240506-th1520-clk-v3-0-085a18a23a7f@xxxxxxxxxxxxxxx/
[4] https://lore.kernel.org/all/20240425082138.374445-1-thomas.bonnefille@xxxxxxxxxxx/
[5] https://lore.kernel.org/all/20240426-th1520-clk-v2-v2-0-96b829e6fcee@xxxxxxxxxxxxxxx/
[6] https://lore.kernel.org/all/20240110-clk-th1520-v1-0-8b0682567984@xxxxxxxxxxxxxxx/

To: Jisheng Zhang <jszhang@xxxxxxxxxx>
To: Guo Ren <guoren@xxxxxxxxxx>
To: Fu Wei <wefu@xxxxxxxxxx>
To: Yangtao Li <frank.li@xxxxxxxx>
To: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
To: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
To: Michael Turquette <mturquette@xxxxxxxxxxxx>
To: Stephen Boyd <sboyd@xxxxxxxxxx>
To: Rob Herring <robh@xxxxxxxxxx>
To: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
To: Conor Dooley <conor+dt@xxxxxxxxxx>
To: Paul Walmsley <paul.walmsley@xxxxxxxxxx>
To: Palmer Dabbelt <palmer@xxxxxxxxxxx>
To: Albert Ou <aou@xxxxxxxxxxxxxxxxx>
Cc: linux-riscv@xxxxxxxxxxxxxxxxxxx
Cc: linux-clk@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx

Signed-off-by: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
---
Drew Fustini (6):
      dt-bindings: clock: Document T-Head TH1520 AP_SUBSYS controller
      clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks
      riscv: dts: thead: Add TH1520 AP_SUBSYS clock controller
      riscv: dts: thead: change TH1520 uart nodes to use clock controller
      riscv: dts: thead: change TH1520 mmc nodes to use clock controller
      riscv: dts: thead: update TH1520 dma and timer nodes to use clock controller

 .../bindings/clock/thead,th1520-clk-ap.yaml        |   58 ++
 MAINTAINERS                                        |    3 +
 arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts |   12 -
 .../boot/dts/thead/th1520-lichee-module-4a.dtsi    |   12 -
 arch/riscv/boot/dts/thead/th1520.dtsi              |   69 +-
 drivers/clk/Kconfig                                |    1 +
 drivers/clk/Makefile                               |    1 +
 drivers/clk/thead/Kconfig                          |   12 +
 drivers/clk/thead/Makefile                         |    2 +
 drivers/clk/thead/clk-th1520-ap.c                  | 1086 ++++++++++++++++++++
 include/dt-bindings/clock/thead,th1520-clk-ap.h    |   96 ++
 11 files changed, 1291 insertions(+), 61 deletions(-)
---
base-commit: 83a7eefedc9b56fe7bfeff13b6c7356688ffa670
change-id: 20240614-th1520-clk-cd585a850d6c

Best regards,
-- 
Drew Fustini <dfustini@xxxxxxxxxxxxxxx>





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux