Re: [PATCH 3/3] arm64: dts: rockchip: Add rkvdec2 Video Decoder on rk3588(s)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Saturday, June 15, 2024 4:25:27 A.M. EDT Jonas Karlman wrote:
> Hi Detlev,
> 
> On 2024-06-15 03:56, Detlev Casanova wrote:
> > Add the rkvdec2 Video Decoder to the RK3588s devicetree.
> > 
> > Signed-off-by: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
> > ---
> > 
> >  .../boot/dts/rockchip/rk3588-rock-5b.dts      |  4 ++++
> >  .../boot/dts/rockchip/rk3588s-orangepi-5.dts  |  4 ++++
> >  arch/arm64/boot/dts/rockchip/rk3588s.dtsi     | 19 +++++++++++++++++++
> >  3 files changed, 27 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> > b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts index
> > c551b676860c..965322c24a65 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> > +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> > @@ -503,6 +503,10 @@ &pwm1 {
> > 
> >  	status = "okay";
> >  
> >  };
> > 
> > +&rkvdec0 {
> > +	status = "okay";
> > +};
> 
> Enable of rkvdec0 should probably be split out from the patch that adds
> the rkvdec0 node to soc dtsi.

Ack

> Also why is rkvdec0 only enabled on rock-5b and orangepi-5?

I only could test on those two but I can enable it on all rk3588 devices.

> > +
> > 
> >  &saradc {
> >  
> >  	vref-supply = <&avcc_1v8_s0>;
> >  	status = "okay";
> > 
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
> > b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts index
> > feea6b20a6bf..2828fb4c182a 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
> > +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
> > @@ -321,6 +321,10 @@ typec5v_pwren: typec5v-pwren {
> > 
> >  	};
> >  
> >  };
> > 
> > +&rkvdec0 {
> > +	status = "okay";
> > +};
> > +
> > 
> >  &saradc {
> >  
> >  	vref-supply = <&avcc_1v8_s0>;
> >  	status = "okay";
> > 
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> > b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi index
> > 0fecbf46e127..09672636dcea 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> > @@ -3034,6 +3034,9 @@ system_sram2: sram@ff001000 {
> > 
> >  		ranges = <0x0 0x0 0xff001000 0xef000>;
> >  		#address-cells = <1>;
> >  		#size-cells = <1>;
> 
> Blank line is missing.
> 
> > +		rkvdec0_sram: rkvdec-sram@0 {
> > +			reg = <0x0 0x78000>;
> > +		};
> > 
> >  	};
> >  	
> >  	pinctrl: pinctrl {
> > 
> > @@ -3103,6 +3106,22 @@ gpio4: gpio@fec50000 {
> > 
> >  			#interrupt-cells = <2>;
> >  		
> >  		};
> >  	
> >  	};
> > 
> > +
> > +	rkvdec0: video-decoder@fdc38100 {
> > +		compatible = "rockchip,rk3588-vdec2";
> > +		reg = <0x0 0xfdc38100 0x0 0x500>;
> > +		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH 0>;
> > +		clocks = <&cru ACLK_RKVDEC0>, <&cru HCLK_RKVDEC0>, 
<&cru
> > CLK_RKVDEC0_CORE>, +			 <&cru 
CLK_RKVDEC0_CA>, <&cru
> > CLK_RKVDEC0_HEVC_CA>;
> > +		clock-names = "axi", "ahb", "core",
> > +			      "cabac", "hevc_cabac";
> > +		assigned-clocks = <&cru ACLK_RKVDEC0>, <&cru 
CLK_RKVDEC0_CORE>,
> > +				  <&cru CLK_RKVDEC0_CA>, <&cru 
CLK_RKVDEC0_HEVC_CA>;
> > +		assigned-clock-rates = <800000000>, <600000000>,
> > +				       <600000000>, <1000000000>;
> > +		power-domains = <&power RK3588_PD_RKVDEC0>;
> 
> iommus and resets should probably be added.
> 
> > +		status = "disabled";
> > +	};
> 
> The iommu node for rkvdec0_mmu seem to be missing, is it not required to
> be able to use memory >4GiB as decoding buffers?

I need to check if the current rockchip iommu driver will work for this 
decoder. I remember that the iommu code for AV1 was a bit different, not sure 
about this rkvdec.

> I would also consider adding the rkvdec1 node(s), if I am understanding
> correctly they can both be used in a cluster or completely independent.

They can be used independently, yes. I'll add rkvdec1 for rk3588 devices 
(rk3588s only has  1 core)

Regards,
Detlev.

> Also on RK3582/RK3583 one (or both) of the decoder cores may be marked
> as bad, yet the remaining one can still be used independently. The idea
> will be that bootloader fixup the DT and disabled/delete-node the bad
> core(s).
> 
> Regards,
> Jonas
> 
> >  };
> >  
> >  #include "rk3588s-pinctrl.dtsi"

Attachment: signature.asc
Description: This is a digitally signed message part.


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux