Re: [PATCH v2 7/8] du-bindings: mips: cpu: Add img,mips compatible

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




在2024年6月15日六月 下午1:28,Conor Dooley写道:
> On Thu, Jun 13, 2024 at 08:40:18PM +0100, Jiaxun Yang wrote:
>> 
>> 
>> 在2024年6月13日六月 下午7:59,Rob Herring写道:
>> > On Wed, Jun 12, 2024 at 05:59:24PM +0100, Jiaxun Yang wrote:
>> >> 
>> >> 
>> >> 在2024年6月12日六月 下午5:39,Conor Dooley写道:
>> >> > On Wed, Jun 12, 2024 at 12:56:26PM +0100, Jiaxun Yang wrote:
>> >> >> This compatible is used by boston.dts.
>> >> >> 
>> >> >> Signed-off-by: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx>
>> >> >> ---
>> >> >> note: This is a wildcard compatible for all MIPS CPUs,
>> >> >>       I think we should use something like "riscv" for riscv.
>> >> >
>> >> > riscv systems, other than simulators etc are not meant to use the
>> >> > "riscv" compatible. All of the real CPUs use "vendor,cpu", "riscv".
>> >> > I'd suggest you add specific compatibles for your CPUs.
>> >> 
>> >> Boston can be combined with many different CPUs, thus we need to have
>> >> such compatibles.
>> >
>> > Then you'll need different DTs. Different h/w, different DT.
>> 
>> The board have 9 CPU types in total, with hundreds of different possible
>> CPU topologies. Maintaining separate DT for them seems impossible in kernel.
>
> But you could definitely add 9 different compatibles for each of these
> different CPUs.

They are already in current bindings, but we need a default one to fill
in kernel dts.

>
>> We can potentially patch this in bootloader, but for existing firmware it's
>> being doing like this for years. I can see for RISC-V QEMU generated DTB is
>> using a single "riscv" compatible and I do think it's a similar problem.
>
> That "riscv" compatible is only supposed to be used for
> simulators/software models. Real CPUs are not meant to use it. AFAICT,
> your boston is a real platform, even if the CPUs are implemented on an
> FPGA they should still have one. If you take the OpenC906 RISC-V CPU and
> put it on an FPGA, you're still meant to put "thead,c906" in your DT.
>

And sadly, boston is also the platform used by MIPS internal emulators :-(

Thanks
- Jiaxun
>
> 附件:
> * signature.asc

-- 
- Jiaxun





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux