On 6/14/24 2:44 AM, Jan Kiszka wrote:
On 26.03.24 19:56, Andrew Davis wrote:
These SerDes lane select muxes use bits from the same register as
the SerDes clock select mux. Make the lane select mux a child
of the SerDes control node.
This removes one more requirement on scm-conf being a syscon node
which will later be converted to fix a couple DTS check warnings.
Signed-off-by: Andrew Davis <afd@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 21 +++++++++++++--------
1 file changed, 13 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 738c5c4acbcd2..5ce67e6a33600 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -66,7 +66,7 @@ serdes0: serdes@900000 {
assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
ti,serdes-clk = <&serdes0_clk>;
#clock-cells = <1>;
- mux-controls = <&serdes_mux 0>;
+ mux-controls = <&serdes0_mux 0>;
};
serdes1: serdes@910000 {
@@ -81,7 +81,7 @@ serdes1: serdes@910000 {
assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>;
ti,serdes-clk = <&serdes1_clk>;
#clock-cells = <1>;
- mux-controls = <&serdes_mux 1>;
+ mux-controls = <&serdes1_mux 0>;
};
main_uart0: serial@2800000 {
@@ -485,18 +485,23 @@ scm_conf: scm-conf@100000 {
serdes0_clk: clock@4080 {
compatible = "ti,am654-serdes-ctrl", "syscon";
reg = <0x4080 0x4>;
+
+ serdes0_mux: mux-controller {
+ compatible = "mmio-mux";
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x0 0x3>; /* lane select */
+ };
};
serdes1_clk: clock@4090 {
compatible = "ti,am654-serdes-ctrl", "syscon";
reg = <0x4090 0x4>;
- };
- serdes_mux: mux-controller {
- compatible = "mmio-mux";
- #mux-control-cells = <1>;
- mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */
- <0x4090 0x3>; /* SERDES1 lane select */
+ serdes1_mux: mux-controller {
+ compatible = "mmio-mux";
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x0 0x3>; /* lane select */
+ };
};
dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 {
This change breaks serdes setup on the IOT2050 SM (k3-am6548-iot2050-
advanced-sm.dts), possibly on more of our devices as well:
platform 5500000.pcie: deferred probe pending: platform: supplier 900000.serdes not ready
platform 900000.serdes: deferred probe pending: (reason unknown)
And PCI remains unavailable. Digging a bit into it, it seems the change
is causing a circular consumer/provider dependency between serdes0 and
serdes1:
root@iot2050-debian:~# ls -l /sys/bus/platform/devices/900000.serdes/
total 0
lrwxrwxrwx 1 root root 0 Jun 14 07:10 consumer:platform:5500000.pcie -> ../../../virtual/devlink/platform:900000.serdes--platform:5500000.pcie
lrwxrwxrwx 1 root root 0 Jun 14 07:10 consumer:platform:910000.serdes -> ../../../virtual/devlink/platform:900000.serdes--platform:910000.serdes
-rw-r--r-- 1 root root 4096 Jun 14 07:10 driver_override
-r--r--r-- 1 root root 4096 Jun 14 07:10 modalias
lrwxrwxrwx 1 root root 0 Jun 14 07:10 of_node -> ../../../../firmware/devicetree/base/bus@100000/serdes@900000
drwxr-xr-x 2 root root 0 Jun 14 07:10 power
lrwxrwxrwx 1 root root 0 Jun 14 07:00 subsystem -> ../../../../bus/platform
lrwxrwxrwx 1 root root 0 Jun 14 07:10 supplier:platform:44083000.system-controller:clock-controller -> ../../../virtual/devlink/platform:44083000.system-controller:clock-controller--platform:900000.serdes
lrwxrwxrwx 1 root root 0 Jun 14 07:10 supplier:platform:44083000.system-controller:power-controller -> ../../../virtual/devlink/platform:44083000.system-controller:power-controller--platform:900000.serdes
lrwxrwxrwx 1 root root 0 Jun 14 07:10 supplier:platform:910000.serdes -> ../../../virtual/devlink/platform:910000.serdes--platform:900000.serdes
-rw-r--r-- 1 root root 4096 Jun 14 07:00 uevent
-r--r--r-- 1 root root 4096 Jun 14 07:10 waiting_for_supplier
root@iot2050-debian:~# ls -l /sys/bus/platform/devices/910000.serdes/
total 0
lrwxrwxrwx 1 root root 0 Jun 14 07:14 consumer:platform:900000.serdes -> ../../../virtual/devlink/platform:910000.serdes--platform:900000.serdes
-rw-r--r-- 1 root root 4096 Jun 14 07:14 driver_override
-r--r--r-- 1 root root 4096 Jun 14 07:14 modalias
lrwxrwxrwx 1 root root 0 Jun 14 07:14 of_node -> ../../../../firmware/devicetree/base/bus@100000/serdes@910000
drwxr-xr-x 2 root root 0 Jun 14 07:14 power
lrwxrwxrwx 1 root root 0 Jun 14 07:00 subsystem -> ../../../../bus/platform
lrwxrwxrwx 1 root root 0 Jun 14 07:14 supplier:platform:44083000.system-controller:clock-controller -> ../../../virtual/devlink/platform:44083000.system-controller:clock-controller--platform:910000.serdes
lrwxrwxrwx 1 root root 0 Jun 14 07:14 supplier:platform:44083000.system-controller:power-controller -> ../../../virtual/devlink/platform:44083000.system-controller:power-controller--platform:910000.serdes
lrwxrwxrwx 1 root root 0 Jun 14 07:14 supplier:platform:900000.serdes -> ../../../virtual/devlink/platform:900000.serdes--platform:910000.serdes
-rw-r--r-- 1 root root 4096 Jun 14 07:00 uevent
-r--r--r-- 1 root root 4096 Jun 14 07:14 waiting_for_supplier
Note that we normally disable serdes1 on this device as it was not
required so far. Enabling the node does not solve the issue, though:
platform 5500000.pcie: deferred probe pending: platform: supplier 900000.serdes not ready
platform 900000.serdes: deferred probe pending: (reason unknown)
platform 910000.serdes: deferred probe pending: (reason unknown)
Thanks for the report, I think I know the issue and can
send the fix here in a bit. In the mean time, could you
see if the following fixes the issue (this isn't fully
correct and will cause a new DTB check warning, but will
let me verify the issue):
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 1af3dedde1f67..06ed74197f893 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -478,7 +478,7 @@ scm_conf: scm-conf@100000 {
ranges = <0x0 0x0 0x00100000 0x1c000>;
serdes0_clk: clock@4080 {
- compatible = "ti,am654-serdes-ctrl", "syscon";
+ compatible = "ti,am654-serdes-ctrl", "syscon", "simple-mfd";
reg = <0x4080 0x4>;
serdes0_mux: mux-controller {
@@ -489,7 +489,7 @@ serdes0_mux: mux-controller {
};
serdes1_clk: clock@4090 {
- compatible = "ti,am654-serdes-ctrl", "syscon";
+ compatible = "ti,am654-serdes-ctrl", "syscon", "simple-mfd";
reg = <0x4090 0x4>;
serdes1_mux: mux-controller {
Thanks,
Andrew
Jan
