Re: [PATCH v9 1/2] dt-bindings: net: wireless: qcom,ath11k: describe the ath11k on QCA6390

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 12, 2024 at 2:52 PM Bartosz Golaszewski <brgl@xxxxxxxx> wrote:
>
> On Wed, Jun 12, 2024 at 2:49 PM Kalle Valo <kvalo@xxxxxxxxxx> wrote:
> >
> > Bartosz Golaszewski <brgl@xxxxxxxx> writes:
> >
> > >> >> Sure, I don't need DT but that's not my point. My point is why require
> > >> >> these supplies for _all_ devices having PCI id 17cb:1101 (ie. QCA6390)
> > >> >> then clearly there are such devices which don't need it? To me that's
> > >> >> bad design and, if I'm understanding correctly, prevents use of
> > >> >> qcom,ath11k-calibration-variant property. To me having the supplies
> > >> >> optional in DT is more approriate.
> > >> >>
> > >> >
> > >> > We require them because *they are physically there*.
> > >>
> > >> I understand that for all known DT QCA6390 hardware, the supplies should
> > >> be provided thus they should be required. If in the future we have
> > >> different design or we represent some pluggable PCI card, then:
> > >> 1. Probably that PCI card does not need power sequencing, thus no DT
> > >> description,
> > >> 2. If still needs power sequencing, you can always amend bindings and
> > >> un-require the supplies.
> > >>
> > >>
> > >> Best regards,
> > >> Krzysztof
> > >>
> > >
> > > Kalle, does the above answer your questions? Are these bindings good to go?
> >
> > To me most important is that we are on the same page that in some cases
> > (eg. with M.2 boards) the supplies can be optional and we can update the
> > bindings doc once such need arises (but we don't make any changes right
> > now). Based on point 2 from Krzysztof I think we all agree, right?
> >
> > Just making sure: if we later change the supplies optional does that
> > create any problems with backwards compatibility? It's important that
> > updates go smoothly.
>
> No, you can always relax the requirements alright. It's only when you
> make them more strict that you'll run into backward compatibility
> issues.
>
> Bart

Kalle,

Is that ok with you? Can we get that queued to avoid the new
check_dtbs warnings in next when the DTS changes land?

Bart





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux