From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Use the mmc_regulator_enable_vqmmc() and mmc_regulator_disable_vqmmc() APIs
to enable/disable the vqmmc regulator.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
v1->v2
- New patch
---
drivers/mmc/host/tmio_mmc_core.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 93e912afd3ae..2ec1a74c85bc 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -897,8 +897,8 @@ static void tmio_mmc_power_on(struct tmio_mmc_host *host, unsigned short vdd)
* It seems, VccQ should be switched on after Vcc, this is also what the
* omap_hsmmc.c driver does.
*/
- if (!IS_ERR(mmc->supply.vqmmc) && !ret) {
- ret = regulator_enable(mmc->supply.vqmmc);
+ if (!ret) {
+ ret = mmc_regulator_enable_vqmmc(mmc);
usleep_range(200, 300);
}
@@ -911,8 +911,7 @@ static void tmio_mmc_power_off(struct tmio_mmc_host *host)
{
struct mmc_host *mmc = host->mmc;
- if (!IS_ERR(mmc->supply.vqmmc))
- regulator_disable(mmc->supply.vqmmc);
+ mmc_regulator_disable_vqmmc(mmc);
if (!IS_ERR(mmc->supply.vmmc))
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
--
2.34.1
