Hi Chintan Vankar,
On Thu, 02 May 2024 14:39:57 +0530, Chintan Vankar wrote:
> This series adds device-tree nodes for CPSW2G and CPSW9G instance
> of the CPSW Ethernet Switch on TI's J784S4 SoC. Additionally,
> two device-tree overlays are also added:
> 1. QSGMII mode with the CPSW9G instance via the ENET EXPANSION 1
> connector.
> 2. USXGMII mode with MAC Ports 1 and 2 of the CPSW9G instance via
> ENET EXPANSION 1 and 2 connectors, configured in fixed-link
> mode of operation at 5Gbps link speed.
>
> [...]
I have applied the following to branch ti-k3-dts-next on [1].
Thank you!
[1/5] arm64: dts: ti: k3-j784s4-evm: Add alias for MCU CPSW2G
commit: 674a20618b0de1afb62622b5051a5371117a1bfd
[2/5] arm64: dts: ti: k3-j784s4-main: Add CPSW2G and CPSW9G nodes
commit: 01bd39357b70ed41fb52b26c7e5b42de328fcdd4
[3/5] arm64: dts: ti: k3-j784s4-evm: Enable Main CPSW2G node and add aliases for it
commit: c2834656bb6d434bf0df0de7710210fbfe7ff927
[4/5] arm64: dts: ti: k3-j784s4: Add overlay to enable QSGMII mode with CPSW9G
commit: 4ad0beeb7ae69ae11ec53c897d0b1af1df60454c
[5/5] arm64: dts: ti: k3-j784s4: Add overlay for dual port USXGMII mode
commit: 838ceca36b2188899a0100461799f179c53de550
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh
