[PATCH v7 0/5] Add CPSW2G and CPSW9G nodes for J784S4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series adds device-tree nodes for CPSW2G and CPSW9G instance
of the CPSW Ethernet Switch on TI's J784S4 SoC. Additionally,
two device-tree overlays are also added:
1. QSGMII mode with the CPSW9G instance via the ENET EXPANSION 1
   connector.
2. USXGMII mode with MAC Ports 1 and 2 of the CPSW9G instance via
   ENET EXPANSION 1 and 2 connectors, configured in fixed-link
   mode of operation at 5Gbps link speed.

This series is based on linux-next tagged next-20240502.

Link to v6:
https://lore.kernel.org/r/20240329053130.2822129-1-c-vankar@xxxxxx/

Changes from v6 to v7:
- Corrected the syntax error in [PATCH v6 5/5].

Chintan Vankar (1):
  arm64: dts: ti: k3-j784s4-evm: Add alias for MCU CPSW2G

Siddharth Vadapalli (4):
  arm64: dts: ti: k3-j784s4-main: Add CPSW2G and CPSW9G nodes
  arm64: dts: ti: k3-j784s4-evm: Enable Main CPSW2G node and add aliases
    for it
  arm64: dts: ti: k3-j784s4: Add overlay to enable QSGMII mode with
    CPSW9G
  arm64: dts: ti: k3-j784s4: Add overlay for dual port USXGMII mode

 arch/arm64/boot/dts/ti/Makefile               |  11 +-
 .../ti/k3-j784s4-evm-quad-port-eth-exp1.dtso  | 147 ++++++++++++++
 .../ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso   |  81 ++++++++
 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts      |  51 +++++
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi    | 187 ++++++++++++++++++
 5 files changed, 476 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso

-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux