Hi Jagadeesh.
On 6/2/24 14:44, Jagadeesh Kona wrote:
Add device nodes for video and camera clock controllers on Qualcomm
SM8650 platform.
Signed-off-by: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8650.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 336c54242778..d964762b0532 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -4,10 +4,12 @@
*/
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8650-camcc.h>
#include <dt-bindings/clock/qcom,sm8650-dispcc.h>
#include <dt-bindings/clock/qcom,sm8650-gcc.h>
#include <dt-bindings/clock/qcom,sm8650-gpucc.h>
#include <dt-bindings/clock/qcom,sm8650-tcsr.h>
+#include <dt-bindings/clock/qcom,sm8650-videocc.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/gpio/gpio.h>
@@ -3315,6 +3317,30 @@ opp-202000000 {
};
};
+ videocc: clock-controller@aaf0000 {
+ compatible = "qcom,sm8650-videocc";
+ reg = <0 0x0aaf0000 0 0x10000>;
+ clocks = <&bi_tcxo_div2>,
+ <&gcc GCC_VIDEO_AHB_CLK>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ camcc: clock-controller@ade0000 {
+ compatible = "qcom,sm8650-camcc";
+ reg = <0 0x0ade0000 0 0x20000>;
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&bi_tcxo_div2>,
+ <&bi_tcxo_ao_div2>,
+ <&sleep_clk>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
When you test the change on a particular board, do you get here any build
time warning messages like this one?
clock-controller@ade0000: 'required-opps' is a required property
from schema $id: http://devicetree.org/schemas/clock/qcom,sm8450-camcc.yaml#
I believe it's a valid warning, which has to be fixes, and as it says it
corresponds to the required property exactly.
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
mdss: display-subsystem@ae00000 {
compatible = "qcom,sm8650-mdss";
reg = <0 0x0ae00000 0 0x1000>;
--
Best wishes,
Vladimir
