Fix the alphabetical ordering in some nodes and rename some regulators
and pins to match the schematics [1][2] as well as to adhere to
preferred naming schemes.
In addition to that:
* vcc_3v3_sd_s0: Fix voltage to be 3.3V
* vcc3v3_pcie:
- Move to NanoPi R6C, this power switch is not available on R6S
- Fix vin-supply (is vcc_5v0 per schematics)
- Add gpios/pincrtl to enable power
* vcc5v0_usb: Remove this regulator since according to the schematics,
vcc5v0_host_20 and vcc5v0_usb_otg0 are directly powered by vcc_5v0
* gmac1: Add rx_delay of 0 (no delay since phy-mode = "rgmii-rxid")
* rgmii_phy1: Add phy-supply as seen in schematics
* pcie2*:
- Add pinctrl reset pins
- Update vpcie3v3-supply to match the schematics
* sdhci: Add vmmc-supply and vqmmc-supply
Links:
[1] https://wiki.friendlyelec.com/wiki/images/f/f7/NanoPi_R6C_2302_SCH.PDF
[2] https://wiki.friendlyelec.com/wiki/images/2/2f/NanoPi_R6S_2208_SCH.PDF
Fixes: f1b11f43b3e9 ("arm64: dts: rockchip: Add support for NanoPi R6S")
Signed-off-by: Sebastian Kropatsch <seb-dev@xxxxxxx>
---
I didn't want to spam many patches with small fixes/improvements, so
this one patch includes lots of small changes. Let me know if another
method is preferred :)
---
.../boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 169 +++++++++---------
.../boot/dts/rockchip/rk3588s-nanopi-r6c.dts | 28 +++
.../boot/dts/rockchip/rk3588s-nanopi-r6s.dts | 5 +
3 files changed, 122 insertions(+), 80 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
index e68d4071400e..8b90bae28302 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
@@ -21,7 +21,7 @@ chosen {
stdout-path = "serial2:1500000n8";
};
- adc-keys {
+ adc-key-maskrom {
compatible = "adc-keys";
io-channels = <&saradc 0>;
io-channel-names = "buttons";
@@ -41,10 +41,10 @@ gpio-keys {
pinctrl-0 = <&key1_pin>;
button-user {
- label = "User";
- linux,code = <BTN_1>;
- gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
debounce-interval = <50>;
+ gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
+ label = "User Button";
+ linux,code = <BTN_1>;
};
};
@@ -80,26 +80,27 @@ lan2_led: led-3 {
};
};
- vcc5v0_sys: vcc5v0-sys-regulator {
+ vcc_5v0: regulator-vcc-5v0 {
compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ regulator-name = "vcc_5v0";
};
- vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+ vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
compatible = "regulator-fixed";
- regulator-name = "vcc_1v1_nldo_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
- vin-supply = <&vcc5v0_sys>;
+ regulator-name = "vcc_1v1_nldo_s3";
+ vin-supply = <&vcc_5v0>;
};
- vcc_3v3_s0: vcc-3v3-s0-regulator {
+ /* SY6280AAC power switch (U3824 in schematics) */
+ vcc_3v3_s0: regulator-vcc-3v3-s0 {
compatible = "regulator-fixed";
regulator-always-on;
regulator-boot-on;
@@ -109,61 +110,45 @@ vcc_3v3_s0: vcc-3v3-s0-regulator {
vin-supply = <&vcc_3v3_s3>;
};
- vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
+ vcc_3v3_sd_s0: regulator-vcc-3v3-sd-s0 {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&sd_s0_pwr>;
- regulator-name = "vcc_3v3_sd_s0";
- regulator-boot-on;
- regulator-max-microvolt = <3000000>;
- regulator-min-microvolt = <3000000>;
- vin-supply = <&vcc_3v3_s3>;
- };
-
- vcc_3v3_pcie20: vcc3v3-pcie20-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_3v3_pcie20";
- regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_sd_s0";
vin-supply = <&vcc_3v3_s3>;
};
- vcc5v0_usb: vcc5v0-usb-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_usb";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc5v0_usb_otg0: vcc5v0-usb-otg0-regulator {
+ /* SY6280AAC power switch (U9539 in schematics) */
+ /* For USB 2.0 Type-A port */
+ vcc_5v0_host_20: regulator-vcc-5v0-host-20 {
compatible = "regulator-fixed";
enable-active-high;
- gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&typec5v_pwren>;
- regulator-name = "vcc5v0_usb_otg0";
+ pinctrl-0 = <&usb_host_pwren_h>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc5v0_usb>;
+ regulator-name = "vcc_5v0_host_20";
+ vin-supply = <&vcc_5v0>;
};
- vcc5v0_host_20: vcc5v0-host-20-regulator {
+ /* SY6280AAC power switch (U9538 in schematics) */
+ /* For USB 3.0 Type-A port */
+ vcc5v0_usb_otg0: regulator-vcc5v0-usb-otg0 {
compatible = "regulator-fixed";
enable-active-high;
- gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host20_en>;
- regulator-name = "vcc5v0_host_20";
+ pinctrl-0 = <&typec5v_pwren_h>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc5v0_usb>;
+ regulator-name = "vcc5v0_usb_otg0";
+ vin-supply = <&vcc_5v0>;
};
};
@@ -211,12 +196,13 @@ &gmac1 {
clock_in_out = "output";
phy-handle = <&rgmii_phy1>;
phy-mode = "rgmii-rxid";
+ pinctrl-names = "default";
pinctrl-0 = <&gmac1_miim
&gmac1_tx_bus2
&gmac1_rx_bus2
&gmac1_rgmii_clk
&gmac1_rgmii_bus>;
- pinctrl-names = "default";
+ rx_delay = <0x00>;
tx_delay = <0x42>;
status = "okay";
};
@@ -230,13 +216,13 @@ vdd_cpu_big0_s0: regulator@42 {
compatible = "rockchip,rk8602";
reg = <0x42>;
fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_cpu_big0_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
+ regulator-name = "vdd_cpu_big0_s0";
regulator-ramp-delay = <2300>;
- vin-supply = <&vcc5v0_sys>;
+ vin-supply = <&vcc_5v0>;
regulator-state-mem {
regulator-off-in-suspend;
@@ -247,13 +233,13 @@ vdd_cpu_big1_s0: regulator@43 {
compatible = "rockchip,rk8603", "rockchip,rk8602";
reg = <0x43>;
fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_cpu_big1_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
+ regulator-name = "vdd_cpu_big1_s0";
regulator-ramp-delay = <2300>;
- vin-supply = <&vcc5v0_sys>;
+ vin-supply = <&vcc_5v0>;
regulator-state-mem {
regulator-off-in-suspend;
@@ -268,13 +254,13 @@ vdd_npu_s0: regulator@42 {
compatible = "rockchip,rk8602";
reg = <0x42>;
fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_npu_s0";
+ regulator-always-on;
+ regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
+ regulator-name = "vdd_npu_s0";
regulator-ramp-delay = <2300>;
- regulator-boot-on;
- regulator-always-on;
- vin-supply = <&vcc5v0_sys>;
+ vin-supply = <&vcc_5v0>;
regulator-state-mem {
regulator-off-in-suspend;
@@ -293,35 +279,43 @@ hym8563: rtc@51 {
reg = <0x51>;
#clock-cells = <0>;
clock-output-names = "hym8563";
- pinctrl-names = "default";
- pinctrl-0 = <&rtc_int>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_int>;
wakeup-source;
};
};
+/* RTL8211F-CG Ethernet */
&mdio1 {
rgmii_phy1: ethernet-phy@1 {
compatible = "ethernet-phy-id001c.c916";
reg = <0x1>;
+ phy-supply = <&vcc_3v3_s0>;
pinctrl-names = "default";
- pinctrl-0 = <&rtl8211f_rst>;
+ pinctrl-0 = <&gmac1_rstn_l>;
reset-assert-us = <20000>;
reset-deassert-us = <100000>;
reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
};
};
+/* RTL8125BG Ethernet */
&pcie2x1l1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie20x1_1_perstn_m2>;
reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
- vpcie3v3-supply = <&vcc_3v3_pcie20>;
+ vpcie3v3-supply = <&vcc_3v3_s3>;
status = "okay";
};
+/* R6C: M.2 M-Key socket */
+/* R6S: RTL8125BG Ethernet */
&pcie2x1l2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie20x1_2_perstn_m0>;
reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
- vpcie3v3-supply = <&vcc_3v3_pcie20>;
status = "okay";
};
@@ -360,24 +354,34 @@ rtc_int: rtc-int {
};
};
+ pcie {
+ pcie20x1_1_perstn_m2: pcie2x1-1-rst {
+ rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie20x1_2_perstn_m0: pcie2x1-2-rst {
+ rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
sdmmc {
- sd_s0_pwr: sd-s0-pwr {
+ sd_s0_pwr: sd-pwr {
rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usb {
- typec5v_pwren: typec5v-pwren {
+ typec5v_pwren_h: usb3-pwren {
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
- vcc5v0_host20_en: vcc5v0-host20-en {
+ usb_host_pwren_h: usb2-pwren {
rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
rtl8211f {
- rtl8211f_rst: rtl8211f-rst {
+ gmac1_rstn_l: rtl8211f-rst {
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -388,15 +392,19 @@ &saradc {
status = "okay";
};
+/* eMMC */
&sdhci {
bus-width = <8>;
- no-sdio;
+ mmc-hs200-1_8v;
no-sd;
+ no-sdio;
non-removable;
- mmc-hs200-1_8v;
+ vmmc-supply = <&vcc_3v3_s3>;
+ vqmmc-supply = <&vcc_1v8_s3>;
status = "okay";
};
+/* microSD card */
&sdmmc {
bus-width = <4>;
cap-sd-highspeed;
@@ -411,16 +419,15 @@ &sdmmc {
};
&spi2 {
- status = "okay";
assigned-clocks = <&cru CLK_SPI2>;
assigned-clock-rates = <200000000>;
+ num-cs = <1>;
pinctrl-names = "default";
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
- num-cs = <1>;
+ status = "okay";
- pmic@0 {
+ rk806_single: pmic@0 {
compatible = "rockchip,rk806";
- spi-max-frequency = <1000000>;
reg = <0x0>;
interrupt-parent = <&gpio0>;
@@ -430,23 +437,24 @@ pmic@0 {
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
+ spi-max-frequency = <1000000>;
system-power-controller;
- vcc1-supply = <&vcc5v0_sys>;
- vcc2-supply = <&vcc5v0_sys>;
- vcc3-supply = <&vcc5v0_sys>;
- vcc4-supply = <&vcc5v0_sys>;
- vcc5-supply = <&vcc5v0_sys>;
- vcc6-supply = <&vcc5v0_sys>;
- vcc7-supply = <&vcc5v0_sys>;
- vcc8-supply = <&vcc5v0_sys>;
- vcc9-supply = <&vcc5v0_sys>;
- vcc10-supply = <&vcc5v0_sys>;
+ vcc1-supply = <&vcc_5v0>;
+ vcc2-supply = <&vcc_5v0>;
+ vcc3-supply = <&vcc_5v0>;
+ vcc4-supply = <&vcc_5v0>;
+ vcc5-supply = <&vcc_5v0>;
+ vcc6-supply = <&vcc_5v0>;
+ vcc7-supply = <&vcc_5v0>;
+ vcc8-supply = <&vcc_5v0>;
+ vcc9-supply = <&vcc_5v0>;
+ vcc10-supply = <&vcc_5v0>;
vcc11-supply = <&vcc_2v0_pldo_s3>;
- vcc12-supply = <&vcc5v0_sys>;
+ vcc12-supply = <&vcc_5v0>;
vcc13-supply = <&vcc_1v1_nldo_s3>;
vcc14-supply = <&vcc_1v1_nldo_s3>;
- vcca-supply = <&vcc5v0_sys>;
+ vcca-supply = <&vcc_5v0>;
gpio-controller;
#gpio-cells = <2>;
@@ -745,10 +753,11 @@ &u2phy2 {
};
&u2phy2_host {
- phy-supply = <&vcc5v0_host_20>;
+ phy-supply = <&vcc_5v0_host_20>;
status = "okay";
};
+/* Debug UART */
&uart2 {
pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
index ccc5e4627517..24dcd3e07ea7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
@@ -7,8 +7,36 @@
/ {
model = "FriendlyElec NanoPi R6C";
compatible = "friendlyarm,nanopi-r6c", "rockchip,rk3588s";
+
+ /* MP2143DJ power switch (U9536 in schematics) */
+ vcc3v3_pcie: regulator-vcc3v3-pcie {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie20x1_2_con_pwren>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3_pcie";
+ vin-supply = <&vcc_5v0>;
+ };
};
&lan2_led {
label = "user_led";
};
+
+/* M.2 M-Key socket */
+&pcie2x1l2 {
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+};
+
+&pinctrl {
+ pcie {
+ pcie20x1_2_con_pwren: pcie20x1-2-con-pwren {
+ rockchip,pins = <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
index 9c3e0b0daaac..d24110b6cf5d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
@@ -12,3 +12,8 @@ / {
&lan2_led {
label = "lan2_led";
};
+
+/* RTL8125BG Ethernet */
+&pcie2x1l2 {
+ vpcie3v3-supply = <&vcc_3v3_s3>;
+};
--
2.43.0
