On Tue, 11 Jun 2024 13:40:15 +0200, Martin Schiller wrote: > Convert the lantiq,gswip bindings to YAML format. > > Also add this new file to the MAINTAINERS file. > > Signed-off-by: Martin Schiller <ms@xxxxxxxxxx> > --- > .../bindings/net/dsa/lantiq,gswip.yaml | 195 ++++++++++++++++++ > .../bindings/net/dsa/lantiq-gswip.txt | 146 ------------- > MAINTAINERS | 1 + > 3 files changed, 196 insertions(+), 146 deletions(-) > create mode 100644 Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml > delete mode 100644 Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.example.dtb: switch@e108000: ports:port@6: 'phy-mode' is a required property from schema $id: http://devicetree.org/schemas/net/dsa/lantiq,gswip.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.example.dtb: switch@e108000: ports:port@6: 'oneOf' conditional failed, one must be fixed: 'fixed-link' is a required property 'phy-handle' is a required property 'managed' is a required property from schema $id: http://devicetree.org/schemas/net/dsa/lantiq,gswip.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.example.dtb: switch@e108000: Unevaluated properties are not allowed ('dsa,member', 'ports' were unexpected) from schema $id: http://devicetree.org/schemas/net/dsa/lantiq,gswip.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240611114027.3136405-2-ms@xxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
