On Fri, 07 Jun 2024 17:50:02 +0300, Viacheslav Bocharov wrote: > Add support for new controller. > JetHome Jethub D2 (j200) is a home automation controller with the following > features: > - DIN Rail Mounting > - Amlogic S905X3 (ARM Cortex-A55) quad-core > - micro-HDMI video out > - 4GB LPDDR4 > - 32GB eMMC flash > - 1 x USB 2.0 > - 1 x 10/100/1000Mbps ethernet > - two module slots for radio/wire interface cards > - 2 x gpio LEDS > - 1 x 1-Wire > - 1 x RS-485 > - 3 x dry contact digital GPIO inputs > - 2 x relay GPIO outputs > - DC 9-36V power source with battery UPS on board option > > Viacheslav Bocharov (2): > dt-bindings: arm: amlogic: add binding for JetHome JetHub D2 > arm64: dts: meson-axg: add support for JetHome JetHub D2 (j200) > > .../devicetree/bindings/arm/amlogic.yaml | 1 + > arch/arm64/boot/dts/amlogic/Makefile | 1 + > .../amlogic/meson-sm1-jethome-jethub-j200.dts | 614 ++++++++++++++++++ > 3 files changed, 616 insertions(+) > create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dts > > > base-commit: 32f88d65f01bf6f45476d7edbe675e44fb9e1d58 > -- > 2.45.2 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y amlogic/meson-sm1-jethome-jethub-j200.dtb' for 20240607145148.2246990-1-adeep@xxxxxxxxx: arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dtb: /soc/bus@ff600000/bus@60000/clock-controller@0: failed to match any schema with compatible: ['amlogic,sm1-audio-clkc'] arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dtb: audio-controller@300: compatible: ['amlogic,sm1-tdmin', 'amlogic,axg-tdmin'] is too long from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-formatters.yaml# arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dtb: audio-controller@340: compatible: ['amlogic,sm1-tdmin', 'amlogic,axg-tdmin'] is too long from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-formatters.yaml# arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dtb: audio-controller@380: compatible: ['amlogic,sm1-tdmin', 'amlogic,axg-tdmin'] is too long from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-formatters.yaml# arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dtb: audio-controller@3c0: compatible: ['amlogic,sm1-tdmin', 'amlogic,axg-tdmin'] is too long from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-formatters.yaml# arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dtb: sys-ctrl@0: '#address-cells', '#size-cells', 'ranges' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml# arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dtb: audio-controller-0: clock-names:0: 'sclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dtb: audio-controller-0: clock-names:1: 'lrclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dtb: audio-controller-0: clock-names:2: 'mclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dtb: audio-controller-1: clock-names:0: 'sclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dtb: audio-controller-1: clock-names:1: 'lrclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dtb: audio-controller-1: clock-names:2: 'mclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dtb: audio-controller-1: Unevaluated properties are not allowed ('clock-names' was unexpected) from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dtb: audio-controller-2: clock-names:0: 'sclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dtb: audio-controller-2: clock-names:1: 'lrclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dtb: audio-controller-2: clock-names:2: 'mclk' was expected from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml# arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dtb: sound: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected) from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml# arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dtb: sound: 'anyOf' conditional failed, one must be fixed: 'clocks' is a required property '#clock-cells' is a required property from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
