Re: [PATCH v3 02/15] pinctrl: renesas: pinctrl-rzg2l: Rename B0WI to BOWI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 30.05.2024 20:38, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> 
> Fix the typo B0WI -> BOWI to match with the RZ/G2L HW manual.
> 
> Reported-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

Tested-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> # on RZ/G3S

> ---
> v2->v3
> - New patch
> ---
>  drivers/pinctrl/renesas/pinctrl-rzg2l.c | 18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> index f784169abf11..169986022a73 100644
> --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> @@ -131,7 +131,7 @@
>  #define PVDD_1800		1	/* I/O domain voltage <= 1.8V */
>  #define PVDD_3300		0	/* I/O domain voltage >= 3.3V */
>  
> -#define PWPR_B0WI		BIT(7)	/* Bit Write Disable */
> +#define PWPR_BOWI		BIT(7)	/* Bit Write Disable */
>  #define PWPR_PFCWE		BIT(6)	/* PFC Register Write Enable */
>  
>  #define PM_MASK			0x03
> @@ -478,8 +478,8 @@ static void rzg2l_pinctrl_set_pfc_mode(struct rzg2l_pinctrl *pctrl,
>  	writeb(reg & ~BIT(pin), pctrl->base + PMC(off));
>  
>  	/* Set the PWPR register to allow PFC register to write */
> -	writel(0x0, pctrl->base + regs->pwpr);		/* B0WI=0, PFCWE=0 */
> -	writel(PWPR_PFCWE, pctrl->base + regs->pwpr);	/* B0WI=0, PFCWE=1 */
> +	writel(0x0, pctrl->base + regs->pwpr);		/* BOWI=0, PFCWE=0 */
> +	writel(PWPR_PFCWE, pctrl->base + regs->pwpr);	/* BOWI=0, PFCWE=1 */
>  
>  	/* Select Pin function mode with PFC register */
>  	reg = readl(pctrl->base + PFC(off));
> @@ -487,8 +487,8 @@ static void rzg2l_pinctrl_set_pfc_mode(struct rzg2l_pinctrl *pctrl,
>  	writel(reg | (func << (pin * 4)), pctrl->base + PFC(off));
>  
>  	/* Set the PWPR register to be write-protected */
> -	writel(0x0, pctrl->base + regs->pwpr);		/* B0WI=0, PFCWE=0 */
> -	writel(PWPR_B0WI, pctrl->base + regs->pwpr);	/* B0WI=1, PFCWE=0 */
> +	writel(0x0, pctrl->base + regs->pwpr);		/* BOWI=0, PFCWE=0 */
> +	writel(PWPR_BOWI, pctrl->base + regs->pwpr);	/* BOWI=1, PFCWE=0 */
>  
>  	/* Switch to Peripheral pin function with PMC register */
>  	reg = readb(pctrl->base + PMC(off));
> @@ -2520,8 +2520,8 @@ static void rzg2l_pinctrl_pm_setup_pfc(struct rzg2l_pinctrl *pctrl)
>  	const struct rzg2l_register_offsets *regs = &hwcfg->regs;
>  
>  	/* Set the PWPR register to allow PFC register to write. */
> -	writel(0x0, pctrl->base + regs->pwpr);		/* B0WI=0, PFCWE=0 */
> -	writel(PWPR_PFCWE, pctrl->base + regs->pwpr);	/* B0WI=0, PFCWE=1 */
> +	writel(0x0, pctrl->base + regs->pwpr);		/* BOWI=0, PFCWE=0 */
> +	writel(PWPR_PFCWE, pctrl->base + regs->pwpr);	/* BOWI=0, PFCWE=1 */
>  
>  	/* Restore port registers. */
>  	for (u32 port = 0; port < nports; port++) {
> @@ -2565,8 +2565,8 @@ static void rzg2l_pinctrl_pm_setup_pfc(struct rzg2l_pinctrl *pctrl)
>  	}
>  
>  	/* Set the PWPR register to be write-protected. */
> -	writel(0x0, pctrl->base + regs->pwpr);		/* B0WI=0, PFCWE=0 */
> -	writel(PWPR_B0WI, pctrl->base + regs->pwpr);	/* B0WI=1, PFCWE=0 */
> +	writel(0x0, pctrl->base + regs->pwpr);		/* BOWI=0, PFCWE=0 */
> +	writel(PWPR_BOWI, pctrl->base + regs->pwpr);	/* BOWI=1, PFCWE=0 */
>  }
>  
>  static int rzg2l_pinctrl_suspend_noirq(struct device *dev)




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux