From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
dev_err_probe() can be used to simplify the existing code. Also it means
we get rid of the following warning which is seen whenever the PMAC
(Ethernet controller which connects to GSWIP's CPU port) has not been
probed yet:
gswip 1e108000.switch: dsa switch register failed: -517
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
---
drivers/net/dsa/lantiq_gswip.c | 53 ++++++++++++++++------------------
1 file changed, 25 insertions(+), 28 deletions(-)
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index b9c7076ce32f..fcb5929c9c88 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -1931,11 +1931,9 @@ static int gswip_gphy_fw_load(struct gswip_priv *priv, struct gswip_gphy_fw *gph
msleep(200);
ret = request_firmware(&fw, gphy_fw->fw_name, dev);
- if (ret) {
- dev_err(dev, "failed to load firmware: %s, error: %i\n",
- gphy_fw->fw_name, ret);
- return ret;
- }
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to load firmware: %s\n",
+ gphy_fw->fw_name);
/* GPHY cores need the firmware code in a persistent and contiguous
* memory area with a 16 kB boundary aligned start address.
@@ -1948,9 +1946,9 @@ static int gswip_gphy_fw_load(struct gswip_priv *priv, struct gswip_gphy_fw *gph
dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN);
memcpy(fw_addr, fw->data, fw->size);
} else {
- dev_err(dev, "failed to alloc firmware memory\n");
release_firmware(fw);
- return -ENOMEM;
+ return dev_err_probe(dev, -ENOMEM,
+ "failed to alloc firmware memory\n");
}
release_firmware(fw);
@@ -1977,8 +1975,8 @@ static int gswip_gphy_fw_probe(struct gswip_priv *priv,
gphy_fw->clk_gate = devm_clk_get(dev, gphyname);
if (IS_ERR(gphy_fw->clk_gate)) {
- dev_err(dev, "Failed to lookup gate clock\n");
- return PTR_ERR(gphy_fw->clk_gate);
+ return dev_err_probe(dev, PTR_ERR(gphy_fw->clk_gate),
+ "Failed to lookup gate clock\n");
}
ret = of_property_read_u32(gphy_fw_np, "reg", &gphy_fw->fw_addr_offset);
@@ -1998,8 +1996,8 @@ static int gswip_gphy_fw_probe(struct gswip_priv *priv,
gphy_fw->fw_name = priv->gphy_fw_name_cfg->ge_firmware_name;
break;
default:
- dev_err(dev, "Unknown GPHY mode %d\n", gphy_mode);
- return -EINVAL;
+ return dev_err_probe(dev, -EINVAL, "Unknown GPHY mode %d\n",
+ gphy_mode);
}
gphy_fw->reset = of_reset_control_array_get_exclusive(gphy_fw_np);
@@ -2050,8 +2048,9 @@ static int gswip_gphy_fw_list(struct gswip_priv *priv,
priv->gphy_fw_name_cfg = &xrx200a2x_gphy_data;
break;
default:
- dev_err(dev, "unknown GSWIP version: 0x%x", version);
- return -ENOENT;
+ return dev_err_probe(dev, -ENOENT,
+ "unknown GSWIP version: 0x%x",
+ version);
}
}
@@ -2059,10 +2058,9 @@ static int gswip_gphy_fw_list(struct gswip_priv *priv,
if (match && match->data)
priv->gphy_fw_name_cfg = match->data;
- if (!priv->gphy_fw_name_cfg) {
- dev_err(dev, "GPHY compatible type not supported");
- return -ENOENT;
- }
+ if (!priv->gphy_fw_name_cfg)
+ return dev_err_probe(dev, -ENOENT,
+ "GPHY compatible type not supported");
priv->num_gphy_fw = of_get_available_child_count(gphy_fw_list_np);
if (!priv->num_gphy_fw)
@@ -2163,8 +2161,8 @@ static int gswip_probe(struct platform_device *pdev)
return -EINVAL;
break;
default:
- dev_err(dev, "unknown GSWIP version: 0x%x", version);
- return -ENOENT;
+ return dev_err_probe(dev, -ENOENT,
+ "unknown GSWIP version: 0x%x", version);
}
/* bring up the mdio bus */
@@ -2172,28 +2170,27 @@ static int gswip_probe(struct platform_device *pdev)
if (gphy_fw_np) {
err = gswip_gphy_fw_list(priv, gphy_fw_np, version);
of_node_put(gphy_fw_np);
- if (err) {
- dev_err(dev, "gphy fw probe failed\n");
- return err;
- }
+ if (err)
+ return dev_err_probe(dev, err,
+ "gphy fw probe failed\n");
}
/* bring up the mdio bus */
err = gswip_mdio(priv);
if (err) {
- dev_err(dev, "mdio probe failed\n");
+ dev_err_probe(dev, err, "mdio probe failed\n");
goto gphy_fw_remove;
}
err = dsa_register_switch(priv->ds);
if (err) {
- dev_err(dev, "dsa switch register failed: %i\n", err);
+ dev_err_probe(dev, err, "dsa switch registration failed\n");
goto gphy_fw_remove;
}
if (!dsa_is_cpu_port(priv->ds, priv->hw_info->cpu_port)) {
- dev_err(dev, "wrong CPU port defined, HW only supports port: %i",
- priv->hw_info->cpu_port);
- err = -EINVAL;
+ err = dev_err_probe(dev, -EINVAL,
+ "wrong CPU port defined, HW only supports port: %i",
+ priv->hw_info->cpu_port);
goto disable_switch;
}
--
2.39.2
