While working on a new PHY support for this board I've noticed quite a few errors. Fix these and introduce an actual board for the module. For now, there was just a dtsi and no actual user of it. Michael Walle (10): ARM: dts: imx6qdl-kontron-samx6i: fix phy-mode ARM: dts: imx6qdl-kontron-samx6i: fix PHY reset ARM: dts: imx6qdl-kontron-samx6i: fix board reset ARM: dts: imx6qdl-kontron-samx6i: cleanup the PMIC node ARM: dts: imx6qdl-kontron-samx6i: fix SPI0 chip selects ARM: dts: imx6qdl-kontron-samx6i: fix product name ARM: dts: imx6qdl-kontron-samx6i: always enable eMMC ARM: dts: imx6qdl-kontron-samx6i: add SDIO_PWR_EN support dt-bindings: arm: fsl: document Kontron SMARC-sAMX6i boards ARM: dts: imx6qdl-kontron-samx6i: add actual device trees .../devicetree/bindings/arm/fsl.yaml | 12 ++ arch/arm/boot/dts/nxp/imx/Makefile | 2 + .../nxp/imx/imx6dl-kontron-samx6i-ads2.dts | 12 ++ .../dts/nxp/imx/imx6dl-kontron-samx6i.dtsi | 2 +- .../dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts | 12 ++ .../dts/nxp/imx/imx6q-kontron-samx6i.dtsi | 25 +--- .../nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi | 121 ++++++++++++++++++ .../dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi | 41 ++++-- 8 files changed, 190 insertions(+), 37 deletions(-) create mode 100644 arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi -- 2.39.2
