DT bits required for HDMI TX support in APQ8098 (msm8998 cousin)
$ make -j20 dtbs_check
DTC_CHK arch/arm64/boot/dts/qcom/msm8998-mtp.dtb
/home/mgonzalez/linux/arch/arm64/boot/dts/qcom/msm8998-mtp.dtb: pcie@1c00000: False schema does not allow {'compatible': ['qcom,pcie-msm8998', 'qcom,pcie-msm8996'], 'reg': [[29360128, 8192], [452984832, 3869], [452988704, 168], [454033408, 1048576]], 'reg-names': ['parf', 'dbi', 'elbi', 'config'], 'device_type': ['pci'], 'linux,pci-domain': [[0]], 'bus-range': [[0, 255]], '#address-cells': [[3]], '#size-cells': [[2]], 'num-lanes': [[1]], 'phys': [[36]], 'phy-names': ['pciephy'], 'status': ['okay'], 'ranges': [[16777216, 0, 0, 455081984, 0, 1048576], [33554432, 0, 456130560, 456130560, 0, 13631488]], '#interrupt-cells': [[1]], 'interrupts': [[0, 405, 4]], 'interrupt-names': ['msi'], 'interrupt-map-mask': [[0, 0, 0, 7]], 'interrupt-map': [[0, 0, 0, 1, 1, 0, 0, 135, 4], [0, 0, 0, 2, 1, 0, 0, 136, 4], [0, 0, 0, 3, 1, 0, 0, 138, 4], [0, 0, 0, 4, 1, 0, 0, 139, 4]], 'clocks': [[37, 94], [37, 91], [37, 92], [37, 93], [37, 95]], 'clock-names': ['pipe', 'aux', 'cfg', 'bus_master', 'bus_slave'], 'power-domains': [[37, 0]], 'iommu-map': [[256, 38, 5248, 1]], 'perst-gpios': [[39, 35, 1]], 'pcie@0': {'device_type': ['pci'], 'reg': [[0, 0, 0, 0, 0]], 'bus-range': [[1, 255]], '#address-cells': [[3]], '#size-cells': [[2]], 'ranges': True}, '$nodename': ['pcie@1c00000']}
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie.yaml#
/home/mgonzalez/linux/arch/arm64/boot/dts/qcom/msm8998-mtp.dtb: pcie@1c00000: Unevaluated properties are not allowed ('#address-cells', '#interrupt-cells', '#size-cells', 'bus-range', 'device_type', 'interrupt-map', 'interrupt-map-mask', 'linux,pci-domain', 'num-lanes', 'pcie@0', 'ranges' were unexpected)
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie.yaml#
/home/mgonzalez/linux/arch/arm64/boot/dts/qcom/msm8998-mtp.dtb: phy@c012000: 'vdd-supply' is a required property
from schema $id: http://devicetree.org/schemas/phy/qcom,qusb2-phy.yaml#
/home/mgonzalez/linux/arch/arm64/boot/dts/qcom/msm8998-mtp.dtb: clock-controller@c8c0000: clocks: [[34, 0], [37, 178], [150, 1], [150, 0], [151, 1], [151, 0], [152], [0], [0], [0], [37, 184]] is too long
from schema $id: http://devicetree.org/schemas/clock/qcom,mmcc.yaml#
Arnaud Vrac (1):
arm64: dts: qcom: add HDMI nodes for msm8998
Marc Gonzalez (3):
dt-bindings: display/msm: hdmi: add qcom,hdmi-phy-8998
dt-bindings: display/msm: hdmi: add qcom,hdmi-tx-8998
arm64: dts: qcom: msm8998: add HDMI GPIOs
Documentation/devicetree/bindings/display/msm/hdmi.yaml | 26 ++++++++++-
Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml | 1 +
arch/arm64/boot/dts/qcom/msm8998.dtsi | 128 ++++++++++++++++++++++++++++++++++++++++++++++++++-
3 files changed, 152 insertions(+), 3 deletions(-)
--
2.34.1
